Read Sony CDX-M1000TF / CDX-M3DI Service Manual online
17
CDX-M3DI/M1000TF
SECTION 3
PHASE ALIGNMENT
3-1. GEAR (CAM L)
3-2. GEAR (CAM R)
1
motor block assy
center mark
gear (cam L) position setting hole
2
PTT 2.6x6
gear (cam R) position setting hole
center mark
cam block assy
• Align the gear (cam L) position setting hole with the center mark on
the bracket before screwing the motor block assy to the mechanism
chassis.
chassis.
1
Align the gear (cam R) position setting hole with the center mark
on the bracket before screwing the cam block assy to the
mechanism chassis.
on the bracket before screwing the cam block assy to the
mechanism chassis.
2
Touch the gear (cam R) with fingers in the direction of rotation
and make sure that there is no phase difference with the R-side
position setting hole.
and make sure that there is no phase difference with the R-side
position setting hole.
Click on the first or last page to see other CDX-M1000TF / CDX-M3DI service manuals if exist.