Read Sony CDX-GT920U Service Manual online
CDX-GT920U
7
AUDIO OUT
REAR
R
AUDIO
OUT
REAR
AUDIO
OUT
FRONT
BUS
AUDIO
IN
AUDIO OUT
FRONT
BUS AUDIO IN
BUS
CONTROL IN
REMOTE
IN
SUB OUT (MONO)
L
from car antenna (aerial)
desde la antena del automóvil
desde la antena del automóvil
AMP REM
Max. supply current 0.3 A
Corriente máx. de alimentación de 0,3 A
Max. supply current 0.3 A
Corriente máx. de alimentación de 0,3 A
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
Blue/white striped
Con rayas azules y blancas
Con rayas azules y blancas
Red
Rojo
Rojo
Yellow
Amarillo
Amarillo
White
Blanco
Blanco
Green
Verde
Verde
Purple
Morado
Morado
White/black striped
Con rayas blancas y negras
Con rayas blancas y negras
Gray/black striped
Con rayas grises y negras
Con rayas grises y negras
Green/black striped
Con rayas verdes y negras
Con rayas verdes y negras
Gray
Gris
Gris
Left
Izquierdo
Izquierdo
Right
Derecho
Derecho
Left
Izquierdo
Izquierdo
Right
Derecho
Derecho
ANT REM
Black
Negro
Negro
Blue
Azul
Azul
Max. supply current 0.1 A
Corriente máx. de alimentación de 0,1 A
Purple/black striped
Con rayas moradas y negras
Con rayas moradas y negras
Source selector
(not supplied)
Selector de fuente
(no suministrado)
XA-C40
Supplied with the CD/MD changer
Suministrado con el cambiador de CD/MD
Suministrado con el cambiador de CD/MD
*
1
Orange/white striped
Con rayas naranjas y blancas
Con rayas naranjas y blancas
Light blue
Azul celeste
Azul celeste
ATT
ILLUMINATION
*
1
*
1
RCA pin cord (not supplied)
*
2
Supplied with XA-C40
*
3
Insert with the cord upwards.
*
1
Cable con terminales RCA
(no suministrado)
(no suministrado)
*
2
Suministrado con el XA-C40
*
3
Insertar con el cable hacia arriba.
*
3
*
2
*
2
Connection diagram
To a metal surface of the car
First connect the black ground (earth) lead, then connect the
yellow and red power supply leads.
yellow and red power supply leads.
To the power antenna (aerial) control lead or
power supply lead of antenna (aerial) booster
Notes
• It is not necessary to connect this lead if there is no power
• It is not necessary to connect this lead if there is no power
antenna (aerial) or antenna (aerial) booster, or with a
manually-operated telescopic antenna (aerial).
manually-operated telescopic antenna (aerial).
• When your car has a built-in FM/AM antenna (aerial) in
the rear/side glass, see “Notes on the control and power
supply leads.”
supply leads.”
To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting any other
system may damage the unit.
system may damage the unit.
To the interface cable of a car telephone
To a car’s illumination signal
To a car’s illumination signal
Be sure to connect the black ground (earth) lead to a metal
surface of the car first.
surface of the car first.
To the +12 V power terminal which is
energized in the accessory position of the
ignition switch
ignition switch
Notes
• If there is no accessory position, connect to the +12 V
• If there is no accessory position, connect to the +12 V
power (battery) terminal which is energized at all times.
Be sure to connect the black ground (earth) lead to a
metal surface of the car first.
Be sure to connect the black ground (earth) lead to a
metal surface of the car first.
• When your car has a built-in FM/AM antenna (aerial) in
the rear/side glass, see “Notes on the control and power
supply leads.”
supply leads.”
To the +12 V power terminal which is
energized at all times
Be sure to connect the black ground (earth) lead to a metal
surface of the car first.
surface of the car first.
Notes on the control and power supply leads
• The power antenna (aerial) control lead (blue) supplies +12 V
• The power antenna (aerial) control lead (blue) supplies +12 V
DC when you turn on the tuner.
• When your car has built-in FM/AM antenna (aerial) in the rear/
side glass, connect the power antenna (aerial) control lead
(blue) or the accessory power supply lead (red) to the power
terminal of the existing antenna (aerial) booster. For details,
consult your dealer.
(blue) or the accessory power supply lead (red) to the power
terminal of the existing antenna (aerial) booster. For details,
consult your dealer.
• A power antenna (aerial) without a relay box cannot be used
with this unit.
Memory hold connection
When the yellow power supply lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
When the yellow power supply lead is connected, power will
always be supplied to the memory circuit even when the ignition
switch is turned off.
Notes on speaker connection
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with
• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
• Do not connect the speaker terminals to the car chassis, or
connect the terminals of the right speakers with those of the
left speaker.
left speaker.
• Do not connect the ground (earth) lead of this unit to the
negative (–) terminal of the speaker.
• Do not attempt to connect the speakers in parallel.
• Connect only passive speakers. Connecting active speakers
• Connect only passive speakers. Connecting active speakers
(with built-in amplifiers) to the speaker terminals may damage
the unit.
the unit.
• To avoid a malfunction, do not use the built-in speaker leads
installed in your car if the unit shares a common negative (–)
lead for the right and left speakers.
lead for the right and left speakers.
• Do not connect the unit’s speaker leads to each other.
Note on connection
If speaker and amplifier are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifier are connected correctly.
If speaker and amplifier are not connected correctly, “FAILURE”
appears in the display. In this case, make sure the speaker and
amplifier are connected correctly.
Click on the first or last page to see other CDX-GT920U service manuals if exist.