Read Sony CDX-GT400 / CDX-GT40W / CDX-GT450 / CDX-GT450S Service Manual online
35
CDX-GT40W/GT400/GT450/GT450S
61
XFLASH&EJECT_OK
I
Front panel open signal input H: eject
62
OPEN_REQ
O
Front panel open/close request signal output Not used in this set.
63
MECON
O
Mechanism deck power supply control signal output
64
CDON
O
Servo power supply control signal output
65
XUART
I
Sony-Bus/MC-Bus change signal input H: Sony-Bus, L: MC-Bus
66
ZMUTE
O
Zero detection mute signal output
67
MECON_CHK
I
MECHA +6V power rising detection signal input
68
CDON_CHK
I
SERVO +3.3V power rising detection signal input
69 to 74
NC
—
Not used. (Open)
75
RSTX
I
System reset signal input
76
NC
—
Not used. (Open)
77
X1A
—
Sub-clock OUTPUT Not used in this set. (Open)
78
X0A
—
Sub-clock INPUT Not used in this set. (Connect to Vss.)
79
VSS
—
Ground
80
X0
I
Main-clock INPUT (12 MHz)
81
X1
O
Main-clock OUTPUT (12 MHz)
82
VCC
—
Power supply pin (+3.3 V)
83
XWD
I
Not used in this set. (Open)
84
XINIT3
I
Not used in this set. (Open)
85
NC
—
Not used. (Open)
86
XSJIG
I
Not used in this set. (Open)
87 to 89
XINIT0 to 2
I
Not used in this set. (Open)
90 to 96
NC
—
Not used. (Open)
97
XDES
I
Destination setting pin
98
XLINE
I
Not used in this set. (Open)
99, 100
NC
—
Not used. (Open)
Pin No.
Pin Name
I/O
Pin Description
Click on the first or last page to see other CDX-GT400 / CDX-GT40W / CDX-GT450 / CDX-GT450S service manuals if exist.