Read Sony CDX-GT270MP / CDX-GT274MP / CDX-GT277ME / CDX-GT320MP Service Manual online
CDX-GT270MP/GT274MP/GT277ME/GT320MP
CDX-GT270MP/GT274MP/GT277ME/GT320MP
5
5
NOTE FOR REPLACEMENT OF THE AUX JACK (J901)
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the front panel.
2. Place the KEY board on the front panel and align the terminals
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the front panel.
2. Place the KEY board on the front panel and align the terminals
of the AUX jack with the holes in the KEY board.
3. Solder three terminals of the jack.
KEY board
front panel
AUX jack
SERVO BOARD
CN401
CN401
MAIN BOARD
CN701
CN701
extension cable (CD mecha)
TEST DISCS
Use following TEST DISC when this set confi rms the operation
and checks it.
Use following TEST DISC when this set confi rms the operation
and checks it.
Part No.
Description
3-702-101-01
DISC (YEDS-18), TEST (for CD)
4-225-203-01
DISC (PATD-012), TEST (for CD)
NOTE FOR REPLACEMENT OF THE SERVO BOARD
When repairing, the complete SERVO board should be replaced
since any parts in the SERVO board cannot be repaired.
When repairing, the complete SERVO board should be replaced
since any parts in the SERVO board cannot be repaired.
NOTE FOR REPLACEMENT OF THE SENSOR BOARD
When SENSOR board is defective, exchange the MECHANICAL
BLOCK ASSY (X).
When SENSOR board is defective, exchange the MECHANICAL
BLOCK ASSY (X).
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig cable (exten-
sion cable (CD mecha)) as shown below.
When repairing or servicing this set, connect the jig cable (exten-
sion cable (CD mecha)) as shown below.
• Connect the MAIN board (CN701) and the SERVO board
(CN401) with the jig cable.
Jig cable:
Part No.
Part No.
Description
A-1818-424-A
EXTENSION CABLE (CD MECHA)
Click on the first or last page to see other CDX-GT270MP / CDX-GT274MP / CDX-GT277ME / CDX-GT320MP service manuals if exist.