Read Sony CDX-GT08 Service Manual online
CDX-GT08/CXS-GT08HP
5
SECTION 1
SERVICE NOTE
EXTENTION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extention
cable) as shown below.
When repairing or servicing this set, connect the jig (extention
cable) as shown below.
• Connect the MAIN board (CNP301) and the SERVO board
(CN2) with the extention cable (Part No. J-2502-076-1).
(CN2) with the extention cable (Part No. J-2502-076-1).
SERVO BOARD
CN2
CN2
MAIN BOARD
CNP301
CNP301
J-2502-076-1
NOTE FOR REPLACEMENT OF THE SERVO BOARD
When repairing, the complete SERVO board (A-1201-631-A)
should be replaced since any parts in the SERVO board cannot be
repaied.
When repairing, the complete SERVO board (A-1201-631-A)
should be replaced since any parts in the SERVO board cannot be
repaied.
NOTE FOR REPLACEMENT OF THE AUX JACK (J901)
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the KEY board.
2. Place the KEY board on the front panel.
3. Solder the three terminals of the jack.
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the KEY board.
2. Place the KEY board on the front panel.
3. Solder the three terminals of the jack.
KEY board
front panel
AUX jack
Click on the first or last page to see other CDX-GT08 service manuals if exist.