Read Sony CDX-G1003ER / CDX-G1003UR / CDX-G1053UR (serv.man2) Service Manual online
CDX-G1003ER/G1003UR/G1053UR
2
2. DIAGRAMS
For Schematic Diagrams.
Note:
• All capacitors are in
• All capacitors are in
μF unless otherwise noted. (p: pF) 50
WV or less are not indicated except for electrolytics and
tantalums.
tantalums.
• All resistors are in
Ω and 1/4 W or less unless otherwise
specifi ed.
• f
: Internal component.
•
C : Panel designation.
•
A : B+ Line.
• Power voltages is dc 14.4V and fed with regulated dc
power supply from ACC and BATT cords.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : TUNER (FM)
( ) : CD PLAY
( ) : CD PLAY
*
: Impossible to measure
• Voltages are taken with VOM (Input impedance 10 M
).
Voltage variations may be noted due to normal production
tolerances.
• Signal path.
F :
AUDIO
f :
TUNER
J :
CD
d :
USB
E :
AUX
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards.
Note:
•
•
X : Parts extracted from the component side.
•
Y : Parts extracted from the conductor side.
• f
: Internal component.
•
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
• Indication of transistor.
C
B
These are omitted.
E
Q
Note: When the complete MAIN board is replaced, the
destination setting is necessary. Refer to “NOTE OF
REPLACING THE COMPLETE MAIN BOARD OR
SYSTEM CONTROLLER (IC501)” on page 4 on orig-
inal service manual.
REPLACING THE COMPLETE MAIN BOARD OR
SYSTEM CONTROLLER (IC501)” on page 4 on orig-
inal service manual.
Note: When the complete MAIN board is replaced, the
destination setting is necessary. Refer to “NOTE OF
REPLACING THE COMPLETE MAIN BOARD OR
SYSTEM CONTROLLER (IC501)” on page 4 on orig-
inal service manual.
REPLACING THE COMPLETE MAIN BOARD OR
SYSTEM CONTROLLER (IC501)” on page 4 on orig-
inal service manual.
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Parts on the pattern face side seen
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
TYPE C/D DISCRIMINATION OF MAIN BOARD
As for the MAIN board of the new type, circuit has been changed
in the midway of production. Repair after distinguishing each type
unit to doing the repair referring to the following.
As for the MAIN board of the new type, circuit has been changed
in the midway of production. Repair after distinguishing each type
unit to doing the repair referring to the following.
•
Distinguish method by serial No.
(Serial No. is printed on the bottom side of this unit)
Model
Destination
Type C
Type D
CDX-G1003ER
Russian
1507891 or
smaller
1507892 or
larger
CDX-G1003UR
Russian
1508191 or
smaller
1508192 or
larger
CDX-G1053UR
E
1508521 or
smaller
1508522 or
larger
•
Distinguish method by existence of IC.
– MAIN Board (Component Side) –
Type C : IC1301/1304 no mount
Type D : IC1301/1304 mount
Type D : IC1301/1304 mount
IC1301
IC1304
1-888-974-31
Click on the first or last page to see other CDX-G1003ER / CDX-G1003UR / CDX-G1053UR (serv.man2) service manuals if exist.