Read Sony CDX-C90R Service Manual online
– 20 –
Pin No.
Pin Name
I/O
Pin Description
53
ASY.O
O
EFM full-swing output (“L” : VSS, “H” : VDD)
54
VC
I
Center voltage input
55
FE
I
Focus error signal input
56
SE
I
Sled error signal input
57
TE
I
Tracking error signal input
58
CE
I
Center error signal input
59
RFDC
I
RF signal input
60
RFC
I
Condenser connection pin for LPF time constant of RF signal.
61
ADIO
O
OP amplifier output (Not used.)
62
AVSS3
—
Analog GND
63
IGEN
I
Current source reference resistor connection for OP amplifier.
64
AVDD3
—
Analog power supply
65, 66
TES2, 3
I
TEST pin (Fixed at “L”.)
67
VSS2
—
Digital GND
68
TEST
I
TEST pin (Fixed at “L”.)
69
SFDR
O
Sled drive output
70
SRDR
O
Sled drive output
71
TFDR
O
Tracking drive output
72
TRDR
O
Tracking drive output
73
FFDR
O
Focus drive output
74
FRDR
O
Focus drive output
75
VDD2
—
Digital power supply
76
COUT
O
Track number count signal output (Not used.)
77
LOCK
O
Not used.
78
MDS
O
Servo control output of spindle motor. (Not used.)
79
MDP
O
Servo control output of spindle motor.
80
SSTP
I
Disc most inner track detection signal input
81
FSTO
O
2/3 frequency division output of pins 103 and 104.
82
FSTI
I
Reference clock input for digital servo.
83
XTSL
I
X’tal select input (“L” : 16.9344 MHz)
84
C4M
O
4.2336 MHz output
85
WDCK
O
D/A interface. Word clock f = 2Fs
86
VDD3
—
Digital power supply
87
LRCK
O
D/A interface. LR clock f = Fs
88
LRCKI
I
LR clock input to DAC. (48 bit slot) (Not used.)
89
PCMD
O
D/A interface. Serial data (2’s COMP, MSB first)
90
PCMDI
I
Audio data input to DAC. (48 bit slot) (Not used.)
91
BCK
O
D/A interface. Bit clock
92
BCKI
I
Bit clock input to DAC. (48 bit slot) (Not used.)
93
EMPH
O
Not used.
94
EMPHI
I
De-emphasis ON/OFF of DAC. (“H” : ON, “L” : OFF) (Not used.)
95
VSS3
—
Digital GND
96
AVSS1
—
L-ch, Analog GND.
97
AVDD1
—
L-ch, Analog power supply.
98
AOUT1
O
L-ch, Analog output. (Not used.)
99
AIN1
I
L-ch, OP amplifier input. (Not used.)
100
LOUT1
O
L-ch, LINE output. (Not used.)
101
AVSS1
—
L-ch, Analog GND.
102
XVDD
—
Analog power supply for master clock.
103
XTAI
I
X’tal oscillator input of master clock (16.9344 MHz).
104
XTAO
O
X’tal oscillator output of master clock. (Not used.)
105
XVSS
—
Analog GND for master clock.
106
AVSS2
—
R-ch, Analog GND.
Click on the first or last page to see other CDX-C90R service manuals if exist.