Read Sony CDX-C560RDS Service Manual online
– 21 –
MW Auto Scan/Stop Level Adjustment
Setting :
D-BASS switch
: OFF
SOURCE
n MODE button : MW
AM RF signal
generator
Carrier frequency : 999 kHz
30% amplitude
modulation by
1 kHz signal
output level
30% amplitude
modulation by
1 kHz signal
output level
: 33 dB (44.7 µV)
AM dummy
antenna (50
antenna (50
Ω
)
antenna
terminal
terminal
set
15 pF
30
Ω
65 pF
Procedure :
1. Set to the test mode. (See page 19.)
2. Push the SOURCE button.
3. Push the MODE button and set to MW.
1. Set to the test mode. (See page 19.)
2. Push the SOURCE button.
3. Push the MODE button and set to MW.
Display
Adjustment Location : tuner unit (TU1)
–set upper view–
TU1
RV1
MW AUTO SCAN/
STOP LEVEL ADJ
RV2
FM AUTO SCAN/
STOP LEVEL ADJ
4. Push the preset 3 button.
Display
5. Adjust with the volume RV1 on TU1 so that the “MW”
indication turns to “MW0” indication on the display window.
But, in case of already indicated “MW0”, turn the RV1 so that
put out light “0” indication and adjustment.
But, in case of already indicated “MW0”, turn the RV1 so that
put out light “0” indication and adjustment.
Display
Adjustment Location : tuner unit (TU1)
REG
SHUF1
REG
SHUF1
REG
SHUF1
TP
TP
TP
VR601
FM RDS
S-METER
ADJ
RV3
FM STEREO
SEPARATION ADJ
Click on the first or last page to see other CDX-C560RDS service manuals if exist.