CDX-4160 - Sony Car Audio Service Manual (repair manual). Page 16

Read Sony CDX-4160 Service Manual online

– 16 –
FM stereo
Level meter
Level meter
signal generator
connection
reading (dB)
output channel
L-CH
L-CH
A
B
R-CH
L-CH
Adjust RV4 on TU1 for
minimum reading.
R-CH
R-CH
C
D
L-CH
R-CH
Adjust RV4 on TU1 for
minimum reading.
L-CH stereo separation : A – B
R-CH stereo separation : C – D
The separations of both channels should be equal.
Specification : Separation more than 23 dB
Adjustment Location : See page 17.
Procedure :
FM Stereo Separation Adjustment
Setting :
D-BASS switch
: OFF
SOURCE button
: FMI
FREQUENCY SELECT switch (E model) : FM 200k
FM RF signal
generator
Carrier frequency : 97.9 MHz
Output level
: 70 dB (3.2 mV)
Mode
: stereo
Modulation
: main : 1 kHz, 33.75 kHz deviation (45%)
sub : 1 kHz, 33.75 kHz deviation (45%)
19 kHz pilot : 7.5 kHz deviation (10%)
antenna
terminal
set
0.01 µF
10 k 
level meter
LINE OUT REAR
AM Auto Scan/Stop Level Adjustment
Setting :
D-BASS switch
: OFF
SOURCE 
n MODE button
: AM
FREQUENCY SELECT switch (E model) : AM 10k
AM RF signal
generator
Carrier frequency : 1000 kHz
30% amplitude
modulation by
1 kHz signal
output level
: 33 dB (44.7 µV)
AM dummy
antenna (50 
)
antenna
terminal
set
15 pF
30 
65 pF
Procedure :
1. Set to the test mode. (See page 15.)
2. Push the  SOURCE  button.
3. Push the  MODE  button and set to AM.
Display
4. Push the preset  3  button.
Display
5. Adjust with the volume RV1 on TU1 so that the “AM” indication
turns to “IAM” indication on the display window.
But, in case of already indicated “IAM”, turn the RV1 so that put
out light “I” indication and adjustment.
Display
Adjustment Location : See page 17.
ST
SHUFFLE
ST
SHUFFLE
ST
AM
AM
I
AM
SHUFFLE
Page of 40
Display

Click on the first or last page to see other CDX-4160 service manuals if exist.