Read Sony ZS-X7 Service Manual online
– 13 –
•
Repeat the procedures in each adjustment several times, and the
frequency coverage and tracking adjustments should be finally
done by the trimmer capacitors.
frequency coverage and tracking adjustments should be finally
done by the trimmer capacitors.
AM IF ADJUSTMENT
Adjust for a maximum reading on level meter.
CFT1
450kHz
AM FREQUENCY COVERAGE ADJUSTMENT
Adjust part
Frequency display
reading on digital
voltmeter.
L4
530kHz
Adjustment Value : 0.9V
Standard Value : 0.85 – 0.95V
Confirmation
1,710kHz
4.6 – 5.8V
AM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L3
620kHz
CT3
1,400kHz
TUNER SECTION
AM Section
BAND button : AM
Volume : MIN
Volume : MIN
FM Section
BAND button : FM
Volume : MIN
Volume : MIN
Adjustment Location : Tuner boar d (See pa ge 14)
FM FREQUENCY COVERAGE ADJUSTMENT
Adjust part
Frequency display
reading on digital
voltmeter.
Confirmation
87.5MHz
1.55 – 1.85V
L2
108MHz
Adjustment Value : 4.0V
Standard Value : 3.9 – 4.1V
FM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
L1
87.5MHz
CT1
108MHz
AM RF signal
generator
generator
30% amplitude modulation by 400Hz
signal.
Output level : as low as possible
signal.
Output level : as low as possible
Put the lead-wire
antenna close to
the set.
antenna close to
the set.
FM RF signal
generator
generator
22.5kHz frequency deviation by
400Hz signal.
Output level : as low as possible
400Hz signal.
Output level : as low as possible
telescopic
antenna
terminal
antenna
terminal
0.01
µ
F
set
16
Ω
+
–
–
i
jack (J501)
level meter
0 dB = 1
µ
V
SECTION 5
ELECTRICAL ADJUSTMENTS
Click on the first or last page to see other ZS-X7 service manuals if exist.