ZS-RS09CP - Sony Audio Service Manual (repair manual). Page 2

0  OR  DOTTED  LINE  

0  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  

General
Speaker
 

Full range: 8 cm (3

 1/4

 inches) dia., 4 

Ω, cone type (2)

Outputs
 

Headphones jack (stereo minijack)

 For 

16 

Ω - 32 Ω impedance headphones

Input
 

AUDIO IN jack (stereo minijack)

 

 (USB) port: Type A, maximum current 500 mA

Power output
 

1.7 W + 1.7 W (at 4 

Ω, 10% harmonic distortion)

Power requirements
 For 

player:

 

120 V AC, 60 Hz (E92, MX model)

 

230 V AC, 50 Hz (AEP, E41, CET, RU model)

 

220 V AC - 230 V AC, 50 Hz (AR model)

 

230 V AC - 240 V AC, 50 Hz (SP model)

 

120 V - 127 V/220 V - 230 V AC,

 

50/60 Hz (BR model)

 

9 V DC, 6 R14 (size C) batteries

 

For remote control:

 

3 V DC, 2 R03 (size AAA) batteries

Power consumption
 AC 

13 

W

Battery life

For player:
FM reception
Sony R14P: approx. 15 h
Sony alkaline LR14: approx. 25 h
CD playback
Sony R14P: approx. 1.5 h
Sony alkaline LR14: approx. 9 h

Dimensions
 

Approx. 365 mm 

× 134 mm × 230 mm (w/h/d)

 (14

 3/8

 inches 

× 5

 3/8

 inches 

× 9

 1/8

 inches)

 

(incl. projecting parts)

Mass
 

Approx. 2.8 kg (6 lb. 2.8 oz) (incl. batteries)

Supplied accessories
 

AC power cord (1)

 

Remote control (1) (Except BR, MX model)

Design and specifi cations are subject to change
without notice.

• Abbreviation
 AR  : 

Argentine 

model

  BR 

: Brazilian model

  CET 

: East European model

  E41 

: 230V AC area in E model

  E92 

: 120V AC area in E model

  MX 

: Mexican model

  RU 

: Russian model

  SP 

: Singapore model

NOTES  ON  CHIP  COMPONENT  REPLACEMENT
• 

Never reuse a disconnected chip component.

• 

Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.

FLEXIBLE  CIRCUIT  BOARD  REPAIRING
• 

Keep the temperature of soldering iron around 270 °C during 
repairing.

• 

Do not touch the soldering iron on the same conductor of the 
circuit board (within 3 times).

• 

Be careful not to apply force on the conductor when soldering 
or unsoldering.

CAUTION
Use of controls or adjustments or performance of procedures 
other than those specifi ed herein may result in hazardous radia-
tion exposure.

The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated by 
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also 
use the procedure in the printed matter which is included in the 
repair parts.
The fl exible board is easily damaged and should be handled with 
care.

NOTES  ON  LASER  DIODE  EMISSION  CHECK
The laser beam on this model is concentrated so as to be focused 
on the disc refl ective surface by the objective lens in the optical 
pickup block. Therefore, when checking the laser diode emission, 
observe from more than 30 cm away from the objective lens.

NOTES  ON  DUALDISCS
A DualDisc is a two sided disc product which mates DVD record-
ed material on one side with digital audio material on the other 
side. However, since the audio material side does not conform to 
the Compact Disc (CD) standard, playback on this product is not 
guaranteed.