Read Sony ZS-M35 (serv.man2) Service Manual online
– 7 –
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Basic Operations
4
Playing a CD
Basic Operations
For hookup instructions, see pages 57 - 59.
1
Press Z PUSH OPEN/CLOSE
down to open the CD
compartment and place the CD
on the CD compartment.
down to open the CD
compartment and place the CD
on the CD compartment.
2
Close the lid of the CD
compartment.
compartment.
3
Press CD u (CD N on the
remote).
remote).
The player turns on (direct
power-on) and the player plays
all the tracks once.
power-on) and the player plays
all the tracks once.
With the label side up
Display
Playing
time
time
Track
number
number
1, 2
3
Basic Operations
Basic Operations
5
Use these buttons for additional operations
To
Press
adjust the volume
VOLUME +, –
(VOL +, – on the remote)
(VOL +, – on the remote)
stop playback
CD x
pause playback
CD u (CD X on the
remote)
Press the button again to
resume play after pause.
remote)
Press the button again to
resume play after pause.
go to the next track
>
go back to the previous track
.
remove the CD
Z
PUSH OPEN/CLOSE
turn on/off the player
POWER
Tip
Next time you want to
listen to a CD, just press
CD u. The player
turns on automatically
and starts playing the
CD.
listen to a CD, just press
CD u. The player
turns on automatically
and starts playing the
CD.
VOLUME –, +
CD u
.
, >
Z
PUSH
OPEN/CLOSE
CD x
POWER
Basic Operations
6
Recording a whole CD
(Synchronized recording)
Display
3
4
2
1
For hookup instructions, see pages 57 - 59.
1
Insert a recordable MD (direct
power-on).
power-on).
2
Press Z PUSH OPEN/CLOSE
and place the CD on the CD
compartment.
and place the CD on the CD
compartment.
Press Z PUSH OPEN/CLOSE
again to close the CD
compartment.
again to close the CD
compartment.
3
Press CD x.
With the label side up
With the label
side up
side up
After “TOC Reading” is
displayed, the disc name
will be displayed if it is
labeled.
displayed, the disc name
will be displayed if it is
labeled.
Insert in the direction of
the arrow
the arrow
5
Basic Operations
Basic Operations
7
To
Press
stop recording
MD x or CD x
turn on/off the player
POWER
If “CD>MD OK?” alternates with time display
There is not enough space on the MD to record the whole
CD.
If it is all right to record as much as possible and cancel
recording of some tracks, press YES•ENTER. To stop
recording, press NO•CANCEL.
If any other messages are displayed, see page 72.
There is not enough space on the MD to record the whole
CD.
If it is all right to record as much as possible and cancel
recording of some tracks, press YES•ENTER. To stop
recording, press NO•CANCEL.
If any other messages are displayed, see page 72.
MD x
Track number
of MD
of MD
YES
ENTER
ENTER
NO
CANCEL
CANCEL
4
To record at high speed, press
HIGH SPEED.
HIGH SPEED.
The indicator lights up.
To record at normal speed, skip this step.
5
Press SYNCHRO REC CD N
MD.
MD.
The player starts recording
automatically.
automatically.
If the MD has any previous
recording, recording will be
made from the last recorded
position.
recording, recording will be
made from the last recorded
position.
Remaining
recording
time of MD
recording
time of MD
Use these buttons for additional operations
CD x
Notes
•
After you
stop recording, do not
disconnect the AC
power cord or move
the player while “TOC
EDIT” is flashing in the
display. If you do so,
recording may not be
done properly.
disconnect the AC
power cord or move
the player while “TOC
EDIT” is flashing in the
display. If you do so,
recording may not be
done properly.
• When you record a
whole CD, you cannot
pause recording.
pause recording.
Tips
• Adjusting the volume or
• Adjusting the volume or
the audio emphasis
(page 49) will not affect
the recording level.
Keep the volume at a
moderate level so as to
prevent the sound from
skipping.
(page 49) will not affect
the recording level.
Keep the volume at a
moderate level so as to
prevent the sound from
skipping.
• To record over the
previous recording, see
page 33.
page 33.
• Once the clock is set, the
recording date and time
are stamped
automatically (page 50).
are stamped
automatically (page 50).
• You can label an MD or a
track during recording
(page 44).
(page 44).
POWER
Click on the first or last page to see other ZS-M35 (serv.man2) service manuals if exist.