Read Sony XDR-S7 Service Manual online
XDR-S7
3
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
POWER
SLEEP
TIMER
MENU
PRESET
DAB/FM
DISPLAY
LIGHT
PRESET
1
2
3
ENTER/FM SCAN
DC IN 9V
TUNING/SELECT +/–
VOLUME +/–
Initial setting for the unit
When the AC power adaptor is plugged in for the first
time after purchase (or after resetting) the unit will
automatically set the clock.
time after purchase (or after resetting) the unit will
automatically set the clock.
1
Plug in the unit.
“Setting clock...” appears in the display, and DAB
data adjusts the clock as it is received. When
finished, the current time appears in the display.
data adjusts the clock as it is received. When
finished, the current time appears in the display.
2
Press POWER to turn on the radio.
The unit will automatically scan and create a list of
receivable DAB broadcasts.
receivable DAB broadcasts.
Notes
• When you use only the batteries, carry out from
• When you use only the batteries, carry out from
step 2.
• If no services are found by the DAB scan, “No
Stations available” appears in the display.
Set the clock
Do the following if DAB broadcasts are not available
(depending on area). The time setting mode by DAB
becomes invalid.
(depending on area). The time setting mode by DAB
becomes invalid.
1
Press MENU and turn TUNING/SELECT to
select “Set clock,” and then press ENTER.
select “Set clock,” and then press ENTER.
The hour indication will be displayed as follows.
2
Turn TUNING/SELECT to set the hour, and
then press ENTER.
then press ENTER.
3
Repeat step 2 to set the minute, year, month
and day.
and day.
After setting the time, the clock starts from 0
seconds.
When changing to FM mode, press DAB/FM, and
then perform the above 3 steps.
seconds.
When changing to FM mode, press DAB/FM, and
then perform the above 3 steps.
Notes
• If you do not operate within 65 seconds while setting
• If you do not operate within 65 seconds while setting
the clock, the clock setting mode will be cancelled.
• The time will be adjusted automatically when the unit
receives a DAB service.
• The clock system of this unit is 24-hour system (“0:00”
= midnight).
Time adjustment-
Summer time
Summer time
Time adjustment is performed only when receiving DAB
service.
DAB service reception for at least one minute is required
to reset the time to Summer time.
service.
DAB service reception for at least one minute is required
to reset the time to Summer time.
Operating the radio
The unit can receive DAB services and FM stations.
1
Press POWER to turn on the radio.
When the unit is turned on again, the last band you
listened to is received.
listened to is received.
2
Press DAB/FM repeatedly to select the desired
band.
band.
Each press changes the band as follows:
DAB
FM
3
Turn TUNING/SELECT to tune to the desired
service or station.
service or station.
If you are selecting DAB, press ENTER.
4
Adjust the volume using VOLUME.
Note in FM usage
The frequency can be set in 0.05 MHz steps for FM.
The frequency can be set in 0.05 MHz steps for FM.
Notes in DAB usage
• If there are no services, you can choose only MANUAL
• If there are no services, you can choose only MANUAL
mode. (See “Other useful functions for DAB”.)
• When the ensemble for the selected service cannot be
received, “No Stations available” appears in the display.
About SC
(Secondary Component)
(Secondary Component)
If the selected primary component has a secondary
component, “**” appears in the display.
component, “**” appears in the display.
Turn TUNING/SELECT and press ENTER to receive the
desired secondary component. “**” appears while the
secondary component is received.
desired secondary component. “**” appears while the
secondary component is received.
Note
When the selected secondary component is finished, the
unit returns automatically to the primary component.
When the selected secondary component is finished, the
unit returns automatically to the primary component.
About the RDS
(Radio Data System)
(Radio Data System)
When the unit receives an FM station transmitting RDS
data, “RDS” appears in the display.
data, “RDS” appears in the display.
Each time you press DISPLAY, the display changes as
follows: current time and date, frequency, text
information.
follows: current time and date, frequency, text
information.
To listen with headphones
You can enjoy the radio and external equipment
connected to the line in by headphones (not supplied).
Connect headphones (not supplied) to the
connected to the line in by headphones (not supplied).
Connect headphones (not supplied) to the
J
(headphones) jack. The speaker is deactivated when
headphones are connected.
headphones are connected.
Click on the first or last page to see other XDR-S7 service manuals if exist.