Read Sony XDR-S10HDIP Service Manual online
XDR-S10HDiP
5
Playing the radio
–Manual tuning
1
Press RADIO/BAND to turn on the radio
and select the AM or FM band.
and select the AM or FM band.
2
Press TUNE + or – to tune in to a desired
frequency.
frequency.
3
Adjust the volume using VOLUME + or
–.
–.
–Preset tuning
You can preset 20 stations each for AM and FM.
Presetting a station
1
Follow steps 1 and 2 in “Manual tuning”
to tune the frequency you wish to preset.
to tune the frequency you wish to preset.
2
Press and hold ENTER for a few seconds.
The display changes as follow:
The next preset number from the most recent
preset is displayed (but if the last preset
number was 20, 20 is displayed).
preset is displayed (but if the last preset
number was 20, 20 is displayed).
3
Press PRESET + or – to select the preset
number, then press ENTER.
number, then press ENTER.
The frequency is stored with the selected
preset number and you will hear a beep.
preset number and you will hear a beep.
To preset another station, repeat these steps.
Note
If you try to store another station with the same
preset number, the previously stored station will
be replaced.
If you try to store another station with the same
preset number, the previously stored station will
be replaced.
Tuning in to a station
1
Press RADIO/BAND to turn on the radio
and select the AM or FM band.
and select the AM or FM band.
2
Press PRESET + or – to select the desired
preset number.
preset number.
3
Adjust the volume using VOLUME + or
–.
–.
–Scan tuning
The unit will automatically scan the selected
band.
In HD scan, HD Radio stations are scanned.
band.
In HD scan, HD Radio stations are scanned.
1
Press RADIO/BAND to turn on the radio
and select the AM or FM band.
and select the AM or FM band.
2
Press MENU to show the menu display.
3
Press SEL
7
or
W
to select “SCAN” or
“HD SCAN,” then press ENTER.
Scanning of the selected band starts.
When a station is received, scanning pauses
for 3 seconds and then continues.
When a station is received, scanning pauses
for 3 seconds and then continues.
4
When the unit tunes in to the desired
station, do any of the following
operations to stop scanning.
station, do any of the following
operations to stop scanning.
– Press ENTER on the unit or remote
commander.
– Press SCAN or HD SCAN on the remote
commander.
5
If necessary, press TUNE + or – to tune in
to the station more precisely.
to the station more precisely.
6
Adjust the volume using VOLUME + or
–.
–.
Tip
You can scan for stations directly by pressing
SCAN or HD SCAN on the remote commander.
You can scan for stations directly by pressing
SCAN or HD SCAN on the remote commander.
Changing the display
mode and settings
mode and settings
To change the display mode
Press DISPLAY on the remote commander.
The display changes as follows:
The display changes as follows:
When an analog radio station is
received
received
Y
" Field strength level indicator
# Preset number*
$ Band
% Frequency
& Current time
# Preset number*
$ Band
% Frequency
& Current time
*
When you tune in a station by selecting a preset
number.
number.
When an analog FM broadcast that
supports RBDS (Radio Broadcast Data
System) is received
supports RBDS (Radio Broadcast Data
System) is received
When text information is received
Y
Y
" Field strength level indicator
# Preset number*
$ Band
% Station name
# Preset number*
$ Band
% Station name
Name of station currently tuned in.
& Frequency
' Text information
' Text information
Text information transmitted from station.
( Current time
*
When you tune in a station by selecting a preset
number.
number.
Note
The display item differs depending on the content
of a broadcast or the station.
The display item differs depending on the content
of a broadcast or the station.
When an HD Radio station is received
Y
Y
" HD indicator
HD indicator
Reception status
Stays lit
Strong HD signal, digital
reception*
reception*
Flashes
Weak HD signal, analog
reception
reception
Not displayed
No HD signal, analog
reception
reception
* The HD indicator flashes momentarily at
first, and then stays lit.
# Field strength level indicator
$ Preset number*
% Current station’s call letters
& Band
' Station name and information
( Title/Artist name
) Sub channel (FM only)
$ Preset number*
% Current station’s call letters
& Band
' Station name and information
( Title/Artist name
) Sub channel (FM only)
Appears when the HD Radio station
broadcasts multiple programs.
Press TUNE + or – to select a sub channel.
broadcasts multiple programs.
Press TUNE + or – to select a sub channel.
* Frequency
+ Current time
, Text information
+ Current time
, Text information
*
When you tune in a station by selecting a preset
number
number
Note
The display item differs depending on the content
of a broadcast or the station.
The display item differs depending on the content
of a broadcast or the station.
To change the display
settings (BRIGHTNESS/
CONTRAST)
settings (BRIGHTNESS/
CONTRAST)
1
Press MENU to show the menu display.
2
Press SEL
7
or
W
to select
“BRIGHTNESS” or “CONTRAST,” then
press ENTER.
press ENTER.
3
Press SEL
7
or
W
to select the setting or
to adjust the level, then press ENTER.
BRIGHTNESS:
The brightness of the display is selected
from “HIGH,” “MIDDLE” or “LOW.”
from “HIGH,” “MIDDLE” or “LOW.”
CONTRAST:
The contrast of the display can be adjusted
by 11 levels.
by 11 levels.
Note
If you do not set the menu within 10 seconds, the
setting mode is completed.
If you do not set the menu within 10 seconds, the
setting mode is completed.
Tip
You can adjust “BRIGHTNESS” directly by
pressing BRIGHT on the remote commander.
You can adjust “BRIGHTNESS” directly by
pressing BRIGHT on the remote commander.
Playing an iPod
You can enjoy iPod audio by connecting to this
unit. To use an iPod, refer to the user’s guide of
your iPod.
unit. To use an iPod, refer to the user’s guide of
your iPod.
Notes
The connector of the unit is exclusively for use
with iPod. When you use the device that does
not match the connector, connect it to the
AUDIO IN terminal of this unit with the
supplied audio connecting cable.
Sony cannot accept responsibility in the event
that data recorded on an iPod is lost or
damaged when using an iPod connected to this
unit.
For details of environmental conditions for
operating your iPod, check the website of Apple
Inc.
with iPod. When you use the device that does
not match the connector, connect it to the
AUDIO IN terminal of this unit with the
supplied audio connecting cable.
Sony cannot accept responsibility in the event
that data recorded on an iPod is lost or
damaged when using an iPod connected to this
unit.
For details of environmental conditions for
operating your iPod, check the website of Apple
Inc.
1
Attach the Apple iPod Universal Dock
Adapter (not supplied) to your iPod and
insert into the connector of the unit. If
you are using an iPhone, attach the
supplied universal dock adapter for
iPhone before inserting into the
connector.
Adapter (not supplied) to your iPod and
insert into the connector of the unit. If
you are using an iPhone, attach the
supplied universal dock adapter for
iPhone before inserting into the
connector.
2
Press iPod
V.
The iPod begins to play automatically.
You can operate the connected iPod by this
unit or the iPod buttons.
You can operate the connected iPod by this
unit or the iPod buttons.
3
Adjust the volume using VOLUME + or
–.
–.
To
Press
Turn off the iPod
POWER, or press
and hold iPod
V
and hold iPod
V
Pause playback
iPod
V
To resume play,
press it again.
press it again.
Go to the next track
Go back to the previous
track
track
*
Locate a point while
listening to the sound
listening to the sound
(forward) or
(backward)
while playing and
hold it until you
find the point.
(backward)
while playing and
hold it until you
find the point.
Locate a point while
observing the display
observing the display
(forward) or
(backward)
in pause and hold
it until you find
the point.
(backward)
in pause and hold
it until you find
the point.
Go back to the previous
menu
menu
MENU**
Select a menu item or a
track for playback
track for playback
7/W**
Execute the selected menu
or begin playback
or begin playback
ENTER**
* During playback, this operation goes back to
the beginning of the current track. To go back
to the previous track, press twice.
to the previous track, press twice.
**These operations are available only when using
the supplied remote commander.
Notes
When inserting an iPod into the unit, be sure to
use the universal dock adapter supplied with
your iPod or commercially available from
Apple Inc.
When inserting an iPhone into the unit, be sure to
use the universal dock adapter supplied with the
unit or commercially available from Apple Inc.
When placing or removing the iPod, handle the
iPod in the same angle as that of the connector
on this unit and do not twist or bend the iPod
to prevent connector damage.
Do not carry the unit with an iPod set on the
connector. Doing so may cause a malfunction.
When placing or removing the iPod, brace the
unit with one hand and take care not to press
the controls of the iPod by mistake.
Before disconnecting the iPod, pause playback.
use the universal dock adapter supplied with
your iPod or commercially available from
Apple Inc.
When inserting an iPhone into the unit, be sure to
use the universal dock adapter supplied with the
unit or commercially available from Apple Inc.
When placing or removing the iPod, handle the
iPod in the same angle as that of the connector
on this unit and do not twist or bend the iPod
to prevent connector damage.
Do not carry the unit with an iPod set on the
connector. Doing so may cause a malfunction.
When placing or removing the iPod, brace the
unit with one hand and take care not to press
the controls of the iPod by mistake.
Before disconnecting the iPod, pause playback.
To use the unit as a battery charger
You can use the unit as a battery charger.
The charging begins when the iPod is placed on
the connector.
The charging status appears in the iPod display.
For details, see the user’s guide of your iPod.
The charging begins when the iPod is placed on
the connector.
The charging status appears in the iPod display.
For details, see the user’s guide of your iPod.
Note
Charging for connected iPod is not available
when you are listening to the radio at volume
level 25 or more.
Charging for connected iPod is not available
when you are listening to the radio at volume
level 25 or more.
On copyrights
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
iTunes is a registered trademark of Apple Inc.
iPhone and iTunes Tagging are trademarks of
Apple Inc.
All other trademarks and registered trademarks
are of their respective holders. In this manual,
the U.S. and other countries.
iTunes is a registered trademark of Apple Inc.
iPhone and iTunes Tagging are trademarks of
Apple Inc.
All other trademarks and registered trademarks
are of their respective holders. In this manual,
™
and
®
marks are not specified.
[
[
[
[
[
[
[
[
[
[
[
[
[
Click on the first or last page to see other XDR-S10HDIP service manuals if exist.