Read Sony TC-KE240 / TC-RE340 Service Manual online
29
Pin No.
Pin Name
I/O
Description
37
KEY1
I
Key input terminal (A/D input) (S921, 922, 924, 926 (TC-KE240) x, PAUSE X, m AMS
M, REC MUTING W (TC-KE240) keys input, (S921 to S923, S925 to S927) x, PAUSE X,
AMS M H, m AMS h, REC MUTING W (TC-RE340) keys input
M, REC MUTING W (TC-KE240) keys input, (S921 to S923, S925 to S927) x, PAUSE X,
AMS M H, m AMS h, REC MUTING W (TC-RE340) keys input
38
RESET
I
System reset signal input from the reset signal generator (IC802) “L”: reset
“L” is input for several 100 msec after power on, then it changes to “H”
“L” is input for several 100 msec after power on, then it changes to “H”
39
EXTAL
I
Main system clock input terminal (10 MHz)
40
XTAL
O
Main system clock output terminal (10 MHz)
41
VSS
—
Ground terminal
42
TX
O
Sub system clock output terminal (32.768 kHz) Not used (pull down)
43
TEX
I
Sub system clock input terminal (32.768 kHz) Not used (fixed at “L”)
44
VOL IN
I
REC LEVEL volume (RV901) input terminal (A/D input)
45
DOLBY SW
I
DOLBY NR switch (S917) input terminal (A/D input)
46
AVREF
—
Reference voltage (+5V) input terminal (for A/D converter)
47
AVSS
—
Ground terminal (for A/D converter)
48
ARL LED
O
LED drive signal output of the AUTO REC LEVEL indicator (D901) “L”: LED on
49
CD SYNC LED
O
LED drive signal output of the SYNCHRO indicator (D902) “L”: LED on
50
CAP M2
O
51
CAP M4
O
52
CAP M3
O
53
CAP M1
O
54 to 57
BIAS CAL0 to
BIAS CAL3
O
Calibration control signal output terminal
58 to 68
—
—
Not used (open)
69
OSC ON/OFF
O
Calibration OSC on/off control signal output terminal
70
OSC H/L
O
Calibration tone frequency high/low control signal output terminal “L”: frequency low
71
LINE MUTE
O
Line muting on/off control signal output terminal “L”: muting on
72 to 87
—
—
Not used (open)
88
VF
—
Power supply terminal (for FDP) Not used (fixed at “L”)
89
VDD
—
Power supply terminal (+5V)
90
NC
—
Not used (fixed at “L”)
91
VSS
—
Ground terminal
92
BIAS A
O
Recording bias on/off control signal output terminal “L”: bias on Not used (open)
93
BIAS
O
Recording bias on/off control signal output terminal “L”: bias on
94
VERSION
I
Setting terminal for the model type
95
AMS IN
I
Auto music sensor signal input terminal “L”: AMS detect
96
TRG B
O
Plunger (PM1001) drive signal output terminal
97
TRG A
O
Plunger drive signal output terminal Not used (open)
98
—
—
99
PLAYSW A
I
Mechanism playback detect signal input terminal “H”: playback Not used (open)
100
70U A
I
CrO
2
detect signal input terminal “H”: CrO
2
Not used (fixed at “L”)
Capstan motor (M1002) drive signal output terminal
Click on the first or last page to see other TC-KE240 / TC-RE340 service manuals if exist.