TA-VE810G - Sony Audio Service Manual (repair manual). Page 3

— 3 —

Mode which erases all the user memories registered in this unit and
sets to setting at shipment.

Procedure:
1. With the power turned OFF, press the  POWER  button while

pressing the  MODE  button,  AUDIO FUNCTION >  and
VIDEO FUNCTION >  button simultaneously to turn ON the
power.

2. ALL CLEAR ! will be displayed on the fluorescent indicator

tube, and ALL CLEAR will be executed.

Mode which sets the memory of the unit to the setting of adjust-
ment and check at factory. (Not used for servicing.)

Procedure:
1. With the power turned OFF, press the  POWER  button while

pressing the  MODE  button and  AUDIO FUNCTION >  button
simultaneously to turn ON the power.

2. FACTORY SET will be displayed on the fluorescent indicator

tube, and FACTORY SET will be executed.

Note: In case you return the unit to the customer, do not perform
FACTRY SET. If you do it, perform ALL CLEAR.

Procedure:
1. With the power turned OFF, press the  POWER  button while

pressing the  MODE  button and  VIDEO FUNCTION >  button
simultaneously to turn ON the power.

2. The fluorescent display tubes and LEDs will all light up. Re-

lease the buttons in the order of  VIDEO FUNCTION > , and
MODE .

3. The Fluorescent indicator tube display changes as follows by

pressing the  AUDIO FUNCTION <  ,  AUDIO FUNCTION >  .
(Pressing the other buttons will exit this mode.)

9

Fluorescent indicator tube and all LEDs are OFF

9

9

Partial lighting of fluorescent indicator tube 2, LEDs are OFF *1

9

Partial lighting of fluorescent indicator tube 1, LEDs are OFF *1

9

Fluorescent indicator tubes, LEDs are all lit

• Press  AUDIO FUNCTION <  button or  AUDIO FUNCTION >  button.

• Press  AUDIO FUNCTION <  button or  AUDIO FUNCTION >  button.

• Press  AUDIO FUNCTION <  button or  AUDIO FUNCTION >  button.

• Press  AUDIO FUNCTION <  button or  AUDIO FUNCTION >  button.

*1 Those other than the STANDBY LED go OFF.

4. To exit the mode, press the POWER button to turn OFF the power.

MEMORY

MEMORY

SML THEATER SML HALL ACOUSTIC KARAOKE ARENA STADIUM HIGH

ENHANCED  PRO LOGIC  MONO  MOVIE MUSIC 12  SPORTS GAME  STEREO  MONO

The position of the screen can be adjusted freely to correct the de-
viation of the OSD screen caused by the monitor type that users are
using.

1. Move the cursor of the remote commander supplied as an acces-

sory, and display the OSD screen.

2. Click the SET UP of the OSD screen.
3. Next click TV SET.
4. Next click GRAPHIC POSITION SET.
5. The screen for adjusting the OSD screen position will be dis-

played. Adjust the position with the remote commander supplied
as an accessory.

6. Click EXIT to end.

Method:
1. With the power OFF, while pressing the  MODE  button and

AUDIO FUNCTION <  button together, press the  POWER  but-
ton.

2. “KEY TEST [18]” will be displayed on the FL display tube.
3. The [XX] number is counted down each time a button other than

POWER  is pressed until it becomes [00].
(Buttons pressed once will not be counted again when pressed
another time.)

4. When the number becomes [00], press the  POWER  button and

exit the mode.