TA-VE800G - Sony Audio Service Manual (repair manual). Page 3

— 3 —

Mode which erases all the user memories registered in this unit and
sets to setting at shipment.

Method:
1. With the power turned OFF, press the POWER button while press-

ing the TAPE MONITOR button and VIDEO 2 button simulta-
neously to turn ON the power.

2. ALL CLEAR ! will be displayed on the fluorescent indicator tube,

and ALL CLEAR will be executed.

Mode which sets the memory of the unit to the setting of adjustment
and check at factory. (Not used for servicing.)

Method:
1. With the power turned OFF, press the POWER button while press-

ing the SPEAKER button and TAPE button simultaneously to turn
ON the power.

2. FACTORY SET will be displayed on the fluorescent indicator

tube, and FACTORY SET will be executed.

Note: In case you return the unit to the customer, do not perform
FACTRY SET. If you do it, perform ALL CLEAR.

Method:
1. With the power turned OFF, press the POWER button while press-

ing the TAPE MONITOR button, VIDEO 1 button, and VIDEO 2
button simultaneously to turn ON the power.

2. The fluorescent display tubes and LEDs will all light up.
3. The display will change as follows each time buttons other than

GENRE and MODE are pressed. Therefore, it can be checked if
buttons have been input properly by whether the display changes.

The position of the screen can be adjusted freely to correct the devia-
tion of the OSD screen caused by the monitor type that users are
using.

1. Move the cursor of the remote commander attached, and display

the OSD screen.

2. Click the MAIN MENU FUNCTION of the OSD screen.
3. Next click TV SET.
4. Next click GRAPHIC POSITION SET.
5. The screen for adjusting the OSD screen position will be displayed.

Adjust the position with the remote commander attached.

6. Click EXIT to end.

*1 Those other than the POWER LED go OFF.

4. To exit the mode, press the POWER button to turn OFF the

power.

Fluorescent indicator tubes, LEDs are all lit

Press any button

Partial lighting of fluorescent indicator tube 1, LEDs are OFF *1

Press any button

Partial lighting of fluorescent indicator tube 2, LEDs are OFF *1

Press any button

Press any button

Fluorescent indicator tube and all LEDs are OFF *1

N

N

N

N

NNN

N

N