Read Sony TA-VE150 Service Manual online
– 5 –
SECTION 3
TEST MODE
This equipment is provided with a test mode built in the micro-
computer. The contents are described in the following.
computer. The contents are described in the following.
[Initial Mode]
1. Press
I/
u
button while pressing both
[VIDEO]
and
[5.1CH INPUT, DVD]
buttons simultaneously.
2. “INITIAL” is displayed on the fluorescent indicator tube, and
the status of the unit is set in the following.
• All Memory is clear.
• Center, rear level set to 0.
• Center mode set to Phantom.
• DBFB clear.
• Muting clear.
• Volume level set to min.
• Center, rear level set to 0.
• Center mode set to Phantom.
• DBFB clear.
• Muting clear.
• Volume level set to min.
[Factory Mode]
1. Press
I/
u
button while pressing three buttons of
[TV]
,
[DVD, 2CH]
, and
[5.1CH INPUT, DVD]
simultaneously.
2. Factory setting same as initial except center mode set to nor-
mal using jog can set to volume max or min directly.
[FL Check Mode]
1. Press
I/
u
button while both
[CENTER MODE]
and
[VIDEO]
buttons simultaneously.
2. Fluorescent indicator tube and LED are checked, “FINISH” is
displayed and the status of the unit is set back in normal con-
dition.
dition.
[Gain Up Mode]
1. Press
I/
u
button while pressing
[SURROUND MODE]
but-
ton.
2. “GAIN UP” is displayed on the fluorescent indicator tube and
the rear is gained up 3 dB.
3. To exit from this mode, press two buttons in the same manner
as step1.
“NORMAL” is displayed on the fluorescent indicator tube and
the status of the unit is set back in normal condition.
“NORMAL” is displayed on the fluorescent indicator tube and
the status of the unit is set back in normal condition.
[Version Mode]
1. Press
I/
u
button while pressing both
[CENTER MODE]
and
[SURROUND MODE]
buttons simultaneously.
2. Version of its destination is displayed on the fluorescent indi-
cator tube.
Click on the first or last page to see other TA-VE150 service manuals if exist.