Read Sony TA-SA400WR Service Manual online
TA-SA400WR
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2013.02
New
1.1
2013.05
Addition of System model name (BDV-N9150WL)
Addition of 110 − 240V AC area in E, Chinese, Russian, Mexican, Taiwan and Thai models
Change of Part No. for POWER-SUPPLY CORD (Ref. No. AC1) (Australian and Singapore models)
(SMR-13003)
1.2
2014.04
Addition of Part for CONVERSION PLUG ADAPTOR 3P (Ref. No. ACP2)
(SMR-14006)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.