Read Sony TA-DA9000ES (serv.man2) Service Manual online
SERVICE MANUAL
MULTI-CHANNEL INTEGRATED AMPLIFIER
SPECIFICATIONS
TA-DA9000ES
Ver. 1.3 2005.09
9-961-291-04
Sony Corporation
2005I05-1
Audio Group
© 2005.09
Published by Sony Engineering Corporation
AEP Model
E Model
– Continued on next page –
This amplifier incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
Logic Surround and the DTS** Digital Surround
System.
*
Laboratories.
Dolby , Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
** DTS , DTS-ES Extended Surround , and
Neo:6 are trademarks of Digital Theater Systems,
Inc.
Manufactured under license from Dolby
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
Rated Power Output at Stereo Mode
1)
(8 ohms, 20 Hz
− 20 kHz, THD 0.15%)
200 W + 200 W
(4 ohms, 20 Hz
− 20 kHz, THD 0.15%)
220 W + 220 W
Reference Power Output
(8 ohms, 1 kHz, THD 0.09%)
(8 ohms, 1 kHz, THD 0.09%)
FRONT
2)
: 200 W + 200 W
CENTER
2)
: 200 W
SURR
2)
: 200 W + 200 W
SURR BACK
2)
: 200 W + 200 W
(4 ohms, 1 kHz, THD 0.09%)
FRONT
2)
: 220 W + 220 W
CENTER
2)
: 220 W
SURR
2)
: 220 W + 220 W
SURR BACK
2)
: 220 W + 220 W
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Frequency response
Inputs (Analog)
3) Input shorted and sealed at VOL MAX.
4) Weighted network + 20 kHz LPF, input level.
Area code
Power requirements
CEL
230 V AC, 50/60 Hz
TW
110 V AC, 60 Hz
KR
230 V AC, 60 Hz
PHONO
RIAA equalization curve
±0.5 dB
±0.5 dB
Power Amp Block
10 Hz
− 50 kHz
± 3 dB (8 ohms)
PHONO
Sensitivity: 3.5 mV
Impedance: 50 kilohms
S/N
3)
: 90 dB (A, 40 mV
4)
)
CD/SACD, TAPE,
MD/DAT, DVD, LD,
TV/SAT, VIDEO 1, 2,
3, 4, 5
MD/DAT, DVD, LD,
TV/SAT, VIDEO 1, 2,
3, 4, 5
Sensitivity: 170 mV
Impedance: 50 kilohms
S/N
3)
: 100 dB (A, 2V
4)
)
Inputs (Digital)
Outputs
EQUALIZER
Video section
Inputs/Outputs
Video:
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p, 75
ohms
P
P
R
/C
R
/R-Y: 0.7 Vp-p, 75
ohms
CD/SACD, DVD, LD,
VIDEO 1, TV/SAT
(Coaxial)
VIDEO 1, TV/SAT
(Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A Network, 20 kHz LPF)
CD/SACD, DVD, LD,
TV/SAT, MD/DAT,
VIDEO1, 3 (Optical)
TV/SAT, MD/DAT,
VIDEO1, 3 (Optical)
S/N: 100 dB
(A Network, 20 kHz LPF)
TAPE, MD/DAT
(REC OUT), VIDEO
1, 2, 3 (AUDIO OUT)
(REC OUT), VIDEO
1, 2, 3 (AUDIO OUT)
Voltage: 170 mV
Impedance: 2.2 kilohms
FRONT L/R,
CENTER,
SURROUND L/R,
SURROUND BACK
L/R, SUB WOOFER
CENTER,
SURROUND L/R,
SURROUND BACK
L/R, SUB WOOFER
Voltage: 2 V
Impedance: 220 ohms
Gain levels
±10 dB, 1 dB step
2
TA-DA9000ES
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED
LINE WITH MARK
0
ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 ˚C higher than
• Unleaded solder melts at a temperature about 40 ˚C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if the
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges oc-
cur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges oc-
cur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
i.LINK section
Pin
4 pins
Transmission speed
S200 (Maximum data
transmission speed 200
Mbps)
transmission speed 200
Mbps)
Transmission protocol A/M transmission protocol
Format (input)
Format (input)
Super Audio CD* (DSD
PLAIN)
2 channel linear PCM (IEC-
60958-3)
Sampling frequency: 44.1
kHz
PLAIN)
2 channel linear PCM (IEC-
60958-3)
Sampling frequency: 44.1
kHz
* Conforms to the copy protection technology of
DTLA (Revision 1.2).
General
Power requirements
Power consumption
600 W
Power consumption (during standby mode)
1 W
AC outlets
Dimensions
430
×
238
×
480 mm
including projecting parts and
controls
controls
Mass (Approx.)
28.5 kg
Supplied accessories
AC power coad (1)
Easy Setup Guide (1)
Easy Setup Guide (1)
Remote commander RM-LJ312 (1)
Operating Instructions for RM-LJ312 (1)
R6 (size-AA) batteries (3)
Design and specifications are subject to change
without notice.
without notice.
Area code
Power requirements
AEP
230 V AC, 50/60 Hz
Taiwan
110 V AC, 60 Hz
Korean
220 V AC, 60 Hz
Area code
AC outlets
AEP
1 switched, 100 W MAX
except AEP
−
(no AC outlet)
Area code
Power requirements
3
TA-DA9000ES
1.
SERVICING NOTES
...............................................
5
2.
GENERAL
Location of Controls ....................................................... 10
3.
DISASSEMBLY
3-1. Disassembly Flow ........................................................... 12
3-2. Case (Top)/(Side-L)/(Side-R) ......................................... 13
3-3. Bracket (J)/(P-B) ............................................................. 13
3-4. AMP Board Block ........................................................... 14
3-5. COMPONENT Board Section ........................................ 14
3-6. S-VIDEO/VIDEO Board Block ..................................... 15
3-7. SUB Board, PREOUT Board, MAIN Board .................. 15
3-8. I. LINK Board, DIGITAL Board .................................... 16
3-9. MOTHER Board Section ................................................ 16
3-10. MOTHER Board ............................................................. 17
3-2. Case (Top)/(Side-L)/(Side-R) ......................................... 13
3-3. Bracket (J)/(P-B) ............................................................. 13
3-4. AMP Board Block ........................................................... 14
3-5. COMPONENT Board Section ........................................ 14
3-6. S-VIDEO/VIDEO Board Block ..................................... 15
3-7. SUB Board, PREOUT Board, MAIN Board .................. 15
3-8. I. LINK Board, DIGITAL Board .................................... 16
3-9. MOTHER Board Section ................................................ 16
3-10. MOTHER Board ............................................................. 17
4.
TEST MODE
.............................................................. 18
5.
ELECTRICAL ADJUSTMENTS
......................... 21
6.
DIAGRAMS
6-1. Block Diagram – AUDIO INPUT Section – ................. 23
6-2. Block Diagram – A/D CONVERTER Section – ........... 24
6-3. Block Diagram – DIGITAL INPUT Section – .............. 25
6-4. Block Diagram – I. LINK Section – .............................. 26
6-5. Block Diagram – DSP Section – ................................... 27
6-6. Block Diagram – DIGITAL AUDIO Section – ............. 28
6-7. Block Diagram – AUDIO OUTPUT Section – ............. 29
6-8. Block Diagram – POWER AMP Section – ................... 30
6-9. Block Diagram – VIDEO INPUT/OUT Section – ........ 31
6-10. Block Diagram – COMPONENT VIDEO Section – .... 32
6-11. Block Diagram – DISPLAY/CONTROL Section – ...... 33
6-12. Block Diagram – POWER SUPPLY Section – ............. 34
6-13. Note for Printed Wiring Boards
6-2. Block Diagram – A/D CONVERTER Section – ........... 24
6-3. Block Diagram – DIGITAL INPUT Section – .............. 25
6-4. Block Diagram – I. LINK Section – .............................. 26
6-5. Block Diagram – DSP Section – ................................... 27
6-6. Block Diagram – DIGITAL AUDIO Section – ............. 28
6-7. Block Diagram – AUDIO OUTPUT Section – ............. 29
6-8. Block Diagram – POWER AMP Section – ................... 30
6-9. Block Diagram – VIDEO INPUT/OUT Section – ........ 31
6-10. Block Diagram – COMPONENT VIDEO Section – .... 32
6-11. Block Diagram – DISPLAY/CONTROL Section – ...... 33
6-12. Block Diagram – POWER SUPPLY Section – ............. 34
6-13. Note for Printed Wiring Boards
and Schematic Diagrams ................................................ 35
6-14. Printed Wiring Board
– DIGITAL Board (Component Side) – ......................... 36
6-15. Printed Wiring Board
– DIGITAL Board (Conductor Side) – ........................... 37
6-16. Schematic Diagram – DIGITAL Board (1/11) – ........... 38
6-17. Schematic Diagram – DIGITAL Board (2/11) – ........... 39
6-18. Schematic Diagram – DIGITAL Board (3/11) – ........... 40
6-19. Schematic Diagram – DIGITAL Board (4/11) – ........... 41
6-20. Schematic Diagram – DIGITAL Board (5/11) – ........... 42
6-21. Schematic Diagram – DIGITAL Board (6/11) – ........... 43
6-22. Schematic Diagram – DIGITAL Board (7/11) – ........... 44
6-23. Schematic Diagram – DIGITAL Board (8/11) – ........... 45
6-24. Schematic Diagram – DIGITAL Board (9/11) – ........... 46
6-25. Schematic Diagram – DIGITAL Board (10/11) – ......... 47
6-26. Schematic Diagram – DIGITAL Board (11/11) – ......... 48
6-27. Schematic Diagram – MAIN Board (1/3) – .................. 49
6-28. Schematic Diagram – MAIN Board (2/3) – .................. 50
6-29. Schematic Diagram – MAIN Board (3/3) – .................. 51
6-30. Printed Wiring Board
6-17. Schematic Diagram – DIGITAL Board (2/11) – ........... 39
6-18. Schematic Diagram – DIGITAL Board (3/11) – ........... 40
6-19. Schematic Diagram – DIGITAL Board (4/11) – ........... 41
6-20. Schematic Diagram – DIGITAL Board (5/11) – ........... 42
6-21. Schematic Diagram – DIGITAL Board (6/11) – ........... 43
6-22. Schematic Diagram – DIGITAL Board (7/11) – ........... 44
6-23. Schematic Diagram – DIGITAL Board (8/11) – ........... 45
6-24. Schematic Diagram – DIGITAL Board (9/11) – ........... 46
6-25. Schematic Diagram – DIGITAL Board (10/11) – ......... 47
6-26. Schematic Diagram – DIGITAL Board (11/11) – ......... 48
6-27. Schematic Diagram – MAIN Board (1/3) – .................. 49
6-28. Schematic Diagram – MAIN Board (2/3) – .................. 50
6-29. Schematic Diagram – MAIN Board (3/3) – .................. 51
6-30. Printed Wiring Board
– MAIN Board (Component Side) – .............................. 52
6-31. Printed Wiring Board
– MAIN Board (Conductor Side) – ................................ 53
6-32. Printed Wiring Board
– SUB Board (Component Side) – ................................. 54
6-33. Printed Wiring Board
– SUB Board (Conductor Side) – ................................... 55
6-34. Schematic Diagram – SUB Board (1/2) – ..................... 56
6-35. Schematic Diagram – SUB Board (2/2) – ..................... 57
6-35. Schematic Diagram – SUB Board (2/2) – ..................... 57
6-36. Printed Wiring Board
– I. LINK Board (Component Side) – ............................ 58
6-37. Printed Wiring Board
– I. LINK Board (Conductor Side) – .............................. 59
6-38. Schematic Diagram – I. LINK Board (1/4) – ................ 60
6-39. Schematic Diagram – I. LINK Board (2/4) – ................ 61
6-40. Schematic Diagram – I. LINK Board (3/4) – ................ 62
6-41. Schematic Diagram – I. LINK Board (4/4) – ................ 63
6-42. Printed Wiring Board – PREOUT Board – ................... 64
6-43. Schematic Diagram – PREOUT Board – ...................... 65
6-44. Printed Wiring Board – VIDEO Board – ....................... 66
6-45. Schematic Diagram – VIDEO Board – ......................... 67
6-46. Printed Wiring Board – S-VIDEO Board – ................... 68
6-47. Schematic Diagram – S-VIDEO Board – ...................... 69
6-48. Printed Wiring Board
6-39. Schematic Diagram – I. LINK Board (2/4) – ................ 61
6-40. Schematic Diagram – I. LINK Board (3/4) – ................ 62
6-41. Schematic Diagram – I. LINK Board (4/4) – ................ 63
6-42. Printed Wiring Board – PREOUT Board – ................... 64
6-43. Schematic Diagram – PREOUT Board – ...................... 65
6-44. Printed Wiring Board – VIDEO Board – ....................... 66
6-45. Schematic Diagram – VIDEO Board – ......................... 67
6-46. Printed Wiring Board – S-VIDEO Board – ................... 68
6-47. Schematic Diagram – S-VIDEO Board – ...................... 69
6-48. Printed Wiring Board
– COMPONENT Section (Component Side) – .............. 70
6-49. Printed Wiring Boards
– COMPONENT Section (Conductor Side) – ............... 71
6-50. Schematic Diagram
– COMPONENT Section (1/4) – .................................... 72
6-51. Schematic Diagram
– COMPONENT Section (2/4) – .................................... 73
6-52. Schematic Diagram
– COMPONENT Section (3/4) – .................................... 74
6-53. Schematic Diagram
– COMPONENT Section (4/4) – .................................... 75
6-54. Printed Wiring Board
– MOTHER Board (Component Side) – ........................ 76
6-55. Printed Wiring Board
– MOTHER Board (Conductor Side) – .......................... 77
6-56. Schematic Diagram – MOTHER Board (1/3) – ............ 78
6-57. Schematic Diagram – MOTHER Board (2/3) – ............ 79
6-58. Schematic Diagram – MOTHER Board (3/3) – ............ 80
6-59. Schematic Diagram – AMP Board (1/5) – .................... 81
6-60. Schematic Diagram – AMP Board (2/5) – .................... 82
6-61. Schematic Diagram – AMP Board (3/5) – .................... 83
6-62. Schematic Diagram – AMP Board (4/5) – .................... 84
6-63. Schematic Diagram – AMP Board (5/5) – .................... 85
6-64. Printed Wiring Board
6-57. Schematic Diagram – MOTHER Board (2/3) – ............ 79
6-58. Schematic Diagram – MOTHER Board (3/3) – ............ 80
6-59. Schematic Diagram – AMP Board (1/5) – .................... 81
6-60. Schematic Diagram – AMP Board (2/5) – .................... 82
6-61. Schematic Diagram – AMP Board (3/5) – .................... 83
6-62. Schematic Diagram – AMP Board (4/5) – .................... 84
6-63. Schematic Diagram – AMP Board (5/5) – .................... 85
6-64. Printed Wiring Board
– AMP Board (Component Side) – ................................ 86
6-65. Printed Wiring Board
– AMP Board (Conductor Side) – .................................. 87
6-66. Printed Wiring Board – FCOIL Board – ....................... 88
6-67. Schematic Diagram – FCOIL Board – .......................... 89
6-68. Printed Wiring Board – RCOIL Board – ....................... 90
6-69. Schematic Diagram – RCOIL Board – .......................... 91
6-70. Printed Wiring Boards – SP Section – ........................... 92
6-71. Schematic Diagram – SP Section – ............................... 93
6-72. Printed Wiring Board – DISPLAY Section – ................ 94
6-73. Schematic Diagram – DISPLAY Section – ................... 95
6-74. Printed Wiring Boards – PANEL Section – .................. 96
6-75. Schematic Diagram – PANEL Section – ....................... 97
6-76. Printed Wiring Board
6-67. Schematic Diagram – FCOIL Board – .......................... 89
6-68. Printed Wiring Board – RCOIL Board – ....................... 90
6-69. Schematic Diagram – RCOIL Board – .......................... 91
6-70. Printed Wiring Boards – SP Section – ........................... 92
6-71. Schematic Diagram – SP Section – ............................... 93
6-72. Printed Wiring Board – DISPLAY Section – ................ 94
6-73. Schematic Diagram – DISPLAY Section – ................... 95
6-74. Printed Wiring Boards – PANEL Section – .................. 96
6-75. Schematic Diagram – PANEL Section – ....................... 97
6-76. Printed Wiring Board
– DC Board (Component Side) – ................................... 98
6-77. Printed Wiring Board
– DC Board (Conductor Side) – ..................................... 99
6-78. Schematic Diagram – DC Board – ............................... 100
6-79. Printed Wiring Board – AC Board – ............................. 101
6-80. Schematic Diagram – AC Board – ................................ 102
6-81. IC Pin Function Description .......................................... 119
6-79. Printed Wiring Board – AC Board – ............................. 101
6-80. Schematic Diagram – AC Board – ................................ 102
6-81. IC Pin Function Description .......................................... 119
TABLE OF CONTENTS
4
TA-DA9000ES
7.
EXPLODED VIEWS
7-1. Case Section ................................................................... 141
7-2. Disp Board Section ........................................................ 142
7-3. Volume Section .............................................................. 143
7-4. Panel (Door) Section ...................................................... 144
7-5. Front Panel Section ........................................................ 145
7-6. Base Panel Section ......................................................... 146
7-7. AMP Board Section ....................................................... 147
7-8. Component Board Section ............................................. 148
7-9. Main Board Section ....................................................... 149
7-10. Digital/I. Link Board Section ........................................ 150
7-11. Back Panel Section ......................................................... 151
7-12. Transformer Section ....................................................... 152
7-13. MOTHER Board Section ............................................... 153
7-2. Disp Board Section ........................................................ 142
7-3. Volume Section .............................................................. 143
7-4. Panel (Door) Section ...................................................... 144
7-5. Front Panel Section ........................................................ 145
7-6. Base Panel Section ......................................................... 146
7-7. AMP Board Section ....................................................... 147
7-8. Component Board Section ............................................. 148
7-9. Main Board Section ....................................................... 149
7-10. Digital/I. Link Board Section ........................................ 150
7-11. Back Panel Section ......................................................... 151
7-12. Transformer Section ....................................................... 152
7-13. MOTHER Board Section ............................................... 153
8.
ELECTRICAL PARTS LIST
.............................. 154
