Read Sony STR-ZA1000ES / STR-ZA2000ES / STR-ZA3000ES Service Manual online
STR-ZA1000ES/ZA2000ES/ZA3000ES
11
2-7. DIGITAL BOARD BLOCK-1
2 connector
(CN9001)
(CN9001)
4 connector
(CN1505)
(CN1505)
9 connector
(CN8005)
(CN8005)
qa connector
(CN8004)
(CN8004)
qd connector
(CN8001)
(CN8001)
0 connector
(CN1506)
(CN1506)
5 teflon tape (sub material)
teflon tape (sub material)
teflon tape (sub material)
5 teflon tape
(sub
(sub
material)
7 connector
(CN1502)
(CN1502)
– Rear view –
DIGITAL board
:LUHVHWWLQJ
DIGITAL board
DIGITAL board
6 Cut the cable tie.
cable tie
qf wire (flat type) (11 core)
(CN6000)
(CN6000)
:LUHVHWWLQJ
7HIORQWDSHVHWWLQJ
DIGITAL board
DC FAN
:LUHVHWWLQJ
clamp
1 Remove the wire from the clamp.
3 Remove the wire
from the clamp.
clamp
(ZA3000ES)
colored line
Insert straight into the interior.
flexible flat
cable
cable
connector
OK
colored line
Insert at a slant.
flexible flat
cable
cable
connector
NG
Note 2: When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
Note 1: During reassembly, use new cable ties
to fasten the wires back in place as
they were before disassembly.
qs flexible flat cable (FFC 29P (130)) (CN8006)
Note
Note
3:
Prevent the removed cable from touching
grease of heat sink.
heat sink
8 flexible flat cable (FFC 19P (130)) (CN8009)
Note
Note
3:
Prevent the removed cable from touching
grease of heat sink.
Click on the first or last page to see other STR-ZA1000ES / STR-ZA2000ES / STR-ZA3000ES service manuals if exist.