Read Sony STR-KM5 / STR-KM7 Service Manual online
STR-KM5/KM7
10
SECTION 3
TEST MODE
FL CHECK MODE
All fl uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
All fl uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. When pressing the [SURROUND SPEAKER] and [M-TURBO]
buttons, press the [
?/1
] button to turn on the main power.
2. All segments turn on.
L
C
R
SL
S
SR
SBL SB SBR
LH
RH
SW
COAX
OPT
HDMI
LFE
DTS -ES
NEO:6 USB
96/24
DTS-HD MSTR HI RES
LBR
LPCM
RDS
AAC
TrueHD
SLEEP
D.RANGE
ST
D
PL II
+ EX
MHz
ft.
k Hz m
x z
dB
3. Turn the [INPUT SELECTOR] dial.
4. Test pattern 1 turn on.
4. Test pattern 1 turn on.
L
C
R
SL
S
SR
SBL
SB
SBR
LH
RH
SW
COAX
OPT
HDMI
LFE
DTS -ES
NEO:6 S-AIR
96/24
DTS-HD MSTR HI RES
LBR
LPCM
AAC
TrueHD
SLEEP
D.RANGE
PL
+
ft.
k
m
z
dB
5. Turn the [INPUT SELECTOR] dial once again.
6. Test pattern 2 turn on.
6. Test pattern 2 turn on.
L
R
S
SBL
SBR
LH
RH
SW
COAX
OPT
HDMI
LFE
DTS -ES
NEO:6 USB
96/24
DTS-HD MSTR HI RES
LBR
LPCM
RDS
TrueHD
SLEEP
D.RANGE
ST
D
PL II
EX
MHz
Hz
x
7. Turn the [INPUT SELECTOR] dial once again. All segments
and LED turn off.
8. Every turning of the [INPUT SELECTOR] dial turns on each
segment one after another on the same order.
S.F. CLEAR MODE
The preset sound fi led is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
The preset sound fi led is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [MUSIC] button, press the [
?/1
] button to
turn on the main power.
2. The message “S.F. CLEAR” appears and initialization is per-
formed.
PROTECTOR AUTO OFF
Procedure:
1. While depressing the [MOVIE] and the [GAMING]
buttons simultaneously, press the power [
?/1
] button to
turn on the main power.
2. “PROTEVER” appears.
HISTORY MODE
The state that the set is used is memorized.
The state that the set is used is memorized.
Procedure:
1. While depressing the [SURROUND SPEAKER] and the
[GAMING] buttons simultaneously, press the [
?/1
] button to
turn on the main power.
2. “HISTORY” appears.
3. Each time the [↑] / [↓] buttons on the remote commander is
3. Each time the [↑] / [↓] buttons on the remote commander is
pressed, the item is switched in order as follows.
Items
Display
Protector Count
COUNT xx
Total Single Power On Time
xxxxxHxx 01
Surround Speaker Position
SURPOS X
Sound Field
SND FLD
Input Function
FUNCTION
Input Mode
INP MODE
Digital Select
DIG IN
Stream Information
STREAM
Signal Confi guration
CO xxxxx
Headphone
HP xxx
Volume
VOL xx
Bass
BASS xxx
Treble
TREB xxx
Level FL/FR
F xxxxxx
Level SL/SR
S xxxxxx
Level CT/SW
CWxxxxxx
Level BL/BR
B xxxxxx
Total Power ON Time
xxxxxHxx 02
Muting
MUTE xxx
Power ON Counter (Rebox Test Mode)
REBXxxxx
Protector Type
PROTxxxx
Temperature Record
TEM xxxx
VACS Step
VACS xx
USER INITIALIZE MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. Hold the [
?/1
] for 5 seconds.
2. The message “CLEARING” appears on the display.
3. After a few seconds, “CLEARED” appears.
3. After a few seconds, “CLEARED” appears.
Ver. 1.1
Click on the first or last page to see other STR-KM5 / STR-KM7 service manuals if exist.