Read Sony STR-K885 Service Manual online
12
STR-K885
SECTION 3
ELECTRICAL ADJUSTMENT
[FM Auto Stop Check]
Procedure:
1. Turn the power on.
2. Input the following signal from Signal Generator to FM
2. Input the following signal from Signal Generator to FM
antenna input directly.
* Carrier Freq : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation
: 75 kHz
Modulation : 1 kHz
ANT input : 35 dBu (EMF)
ANT input : 35 dBu (EMF)
Note:
Please use 75 ohm “coaxial cable” to connect SG and the set. You
cannot use video cable for checking.
Please use SG whose output impedance is 75 ohm.
cannot use video cable for checking.
Please use SG whose output impedance is 75 ohm.
3. Set to FM tuner function and scan the input FM signal with
automatic scanning.
4. Confirm that input Frequency of A, B and C are detected and
automatic scanning stops.
The stop of automatic scanning means “The station signal is received
in good condition.”
in good condition.”
TUNER SECTION
generator
OUT (75
Ω
)
SET
Click on the first or last page to see other STR-K885 service manuals if exist.