STR-DN1000 (serv.man2) - Sony Audio Service Manual (repair manual). Page 3

2-3.  Procedure for Blu-ray Disc player
1.  It connects of step 2-1, and the turn on the main power of set 

and Blu-ray Disc player.

2.  “DVD” is selected by using [INPUT SELECTOR] button.
3.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 

DVD test disc “HLX-504 (Part No. J-6090-088-A)” or “HLX-
513 (Part No. J-2501-305-A)” is insert. The disc playback au-
tomatically becomes start “Main Menu” is display.

4.  “1.Color Bar 100%” of “1.Video Signal” is reproduced, and 

100% in the color bar is displayed in the TV monitor, playing 
the Blu-ray Disc player is pause playback.

5.  Press the [

?/1

] button to turn off the main power of the set.

6.  While pressing the [DISPLAY] and [MOVIE] buttons, press 

the [

?/1

] button to turn on the main power of the set. When 

correctly entering the test mode “V.CAL COMPLETE N:P:H” 
is displayed (keeps pressing two buttons until the message ap-
pears).

7.  The NTSC signal adjustment is begun when press the cross 

(center of cursor) button of remote commander, and the dis-
play changes from “NTSC:MW -----” to “NTSC:MW OK C S 
V E” little by little. Finally, the display returns to the display of 
“V.CAL COMPLETE N:P:H”.

8.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 

change to DVD test disc “HLX-506 (Part No. J-6090-077-A)” 
or “HLX-507 (Part No. J-6090-078-A)”. The disc playback au-
tomatically becomes start “Main Menu” is display.

9.  “1.Color Bar 100%” of “1.Video Signal” is reproduced, and 

100% in the color bar is displayed in the TV monitor, playing 
the Blu-ray Disc player is pause playback.

10.  The PAL signal adjustment is begun when press the cross (cen-

ter of cursor) button of remote commander. Finally, the display 
returns to the display of “V.CAL COMPLETE N:P:H”.

11.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 

change to DVD test disc “HLX-104 (Part No. J-6090-199-A)”. 
The disc playback automatically becomes start “Main Menu” 
is display.

12. “59.94Hz, 1080i” 

→ “1.Video Signal” → “1.Color Bar 100%” 

is selected, and 100% in the color bar is displayed in the TV 
monitor, playing the Blu-ray Disc player is pause playback.

13. The video output of the Blu-ray Disc player is switched 1080i 

(The output from the component terminal of the Blu-ray Disc 
player becomes 1080i output).

14. The HD signal adjustment is begun when press the cross (cen-

ter of cursor) button of remote commander. Finally, the display 
returns to the display of “V.CAL COMPLETE N:P:H”.

15. The turn off the main power.