STR-DH740 - Sony Audio Service Manual (repair manual). Page 12

FIX  MODEL  AND  DESTINATION  MODE
This mode is to fi x the set for model & destination.
When turning on the set, the message below appears if the setting 
is not fi xed with its model or destination or both (model & destina-
tion).

 MODEL & AREA NOT
  FIX

 

M D. D S T. U N F I  X

 MODEL NOT FIX

 M  O  D  E  L.  U  N  F  I 

X

 AREA/DESTINATION
 NOT FIX

 

D E S T.   U N F I  X

Procedure:
1.  Press the [?/1] button to turn on the main power.
2.  While pressing [DISPLAY] button, press and release the 

[A.F.D.], [MOVIE], [MUSIC] button in order, the message 
“SPECIALIZE” appears.

3.  Press the [ M ] or [ m ] key of the remote commander, the 

message “<SPECIAL>” appears.

4.  Press the [ ] key of the remote commander to enter the 

Special Menu List.

5.  Each time the [ M ] or [ m ] key of the remote commander is 

pressed, the item is switched in order as follows.

 

SYSTEM 

VERSION

 

S Y S   v  X. X X X 

 MAIN VERSION

 M  A  I 

N   

 

v  X.  X  X

 VIDEO VERSION

 V  I 

D  E  O   

v  X.  X  X

 OSD VERSION

 O  S  D   

 

v  X.  X  X

 DSP SFLASH1 VER 

 S  F  L  A  S  H  v  X.  X  X

 

MODEL 

setting

 

M 

O 

D 

E 

L     

 DESTINATION setting  D  E  S  T  I 

N  Y   

 

 MODEL & 
 DESTINATION check

 

M O D E L  & D E S T

6.  Go to MODEL setting and press the [ ] key of remote 

commander.

7.  Either one of the message as below appears.

 Model not fi 

x 

yet

 

M O D E L. U N F I  X

 Model STR-H54 fi 

x

 

H 5 4   f  i  x    

 Model STR-H74 fi 

x

 

H 7 4   f  i  x    

8.  Press the [ M ] or [ m ] key of remote commander to set model 

info as “H74 fi x” if message “MODEL UNFIX” appears.

9.  Press the [ ] key of remote commander to select the model.
10. The message “MODEL” appears.
11.  Go to DESTINATION setting and press the [ ] key of 

remote commander.

12. Either one of the display below appears according to the 

destination of the set.

 Destination

 

D E S T   U N F I  X

 Destination  UCA  fi 

x  

U 

C 

A 

 f i x   

 Destination  J 

fi

 

x  

J 

   f i x   

 Destination  TW 

fi

 

x  

T 

W 

  f i x   

 Destination  SP/CN fi 

x  

C 

N 

  f i x   

 Destination  KR 

fi

 

x  

K 

R 

  f i x   

 Destination  E2/E3  fi 

x  

C 

H 

3  f i x   

  Destination CEL  fi 

x  

C 

E 

L  f i x   

  Destination AU 

fi

 

x  

A 

U 

  f i x   

  Destination SP 

fi

 

x  

S 

P 

  f i x   

  Destination E51  fi 

x  

E 5 1   f  i  x    

  Destination BR 

fi

 

x  

B 

R 

  f i x   

  Destination AR 

fi

 

x  

A 

R 

  f i x   

  Destination MX 

fi

 

x  

M 

X 

  f i x   

13. Press the [ M ] or [ m ] key of remote commander to set 

destination info if message “DEST UNFIX” appears.

14. Press the [ ] key of remote commander to select the 

destination.

15. The message “DESTINY” appear.
16. Go to MODEL & DESTINATION check and press the [ ] 

key of remote commander.

17. Either one of the message as below appears.

  MODEL & AREA NOT FIX

 M D.  D  S  T.  U  N  F  I  X

  MODEL NOT FIX

 M O  D  E  L.  U  N  F  I  X

  DESTINATION NOT FIX

 D  E  S  T.   

U  N  F  I  X

 STR-H74

 

H 7 4   x x x    

  MODEL & DESTINATION 
 RESET

 M D. D S T. R E S E T

 xxx: 

Area 

display

18. Repeat step (6) onwards if message “MD.DST.UNFIX” 

appears.

19. Repeat step (6) until step (9) and continue with step (16) 

onwards if message “MODEL.UNFIX” appears.

20. Repeat step (13) onwards if message “DEST. UNFIX” 

appears.

21. Set need to be reset and updated again if the message 

appeared incorrectly.

22. Press the [ M ] or [ m ] key of remote commander goes to 

“MD.DST.RESET”.

23. Press the [ ] key of remote commander.
24. The set will power off and then power on by itself.
25. Start the setting again from step (1) onwards.
26. Perform SHIPMENT MODE if the message appears correctly.
27. The set will be power off itself and can be used as normal by 

pressing [?/1] button.