Read Sony STR-DH510 Service Manual online
STR-DH510
9
HISTORY MODE
* The state that the set is used is memorized.
* Procedure:
1. While depressing the [INPUT MODE] and the [MUSIC]
* The state that the set is used is memorized.
* Procedure:
1. While depressing the [INPUT MODE] and the [MUSIC]
buttons simultaneously, press the [
?/1
] button to turn on the
main power.
2. “HISTORY” appears.
3. Each time the [↑] / [↓] buttons on the remote commander is
3. Each time the [↑] / [↓] buttons on the remote commander is
pressed, the item is switched in order as follows.
Items
Protector Count
Protector Count
COUNT XX
Total single power on time
XXXXXHXX 01
Sound Field
SND FLD
Input function
FUNCTION
Input Mode
INP MODE
Digital Select
DIG IN
Stream information
STREAM
Signal confi guration
CO XXXXX
Headphones
HP XXX
Volume
VOL XX
Bass Setting
BASS XXX
Treble Setting
TREB XXX
Level FL/FR
F XXXXXX
Level SL/SR
S XXXXXX
Level CT/SW
CW XXXXXX
Level SBL/SBR
B XXXXXX
Total power on time
OH X 02
Muting Status
MUTE XXX
Power on counter
(Rebox test mode)
REBX. X
Protector Type
PROT XXXX
Temperature when protect
TEM XXXX
DCAC TEST MODE
Procedure:
1. While pressing [INPUT MODE] and the [MOVIE] buttons,
Procedure:
1. While pressing [INPUT MODE] and the [MOVIE] buttons,
press the [
?/1
] button to turn on the main power.
2. The message “DCAC FTM” appears.
SOURCE : normal mode
MIC IN : mode that output audio from mic input.
3. Afterward, press the [DISPLAY] to start DCAC factory test
mode.
INITIALIZE MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [TUNING MODE] and [MUTING] but-
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [TUNING MODE] and [MUTING] but-
tons, press the [
?/1
] button to turn on the main power.
2. The message “CLEARING” appears and the memories are re-
set to the default values.
3. When done, the message “CLEARED” appears.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set re-
ceives can be changed.
Procedure:
1. While pressing the [INPUT MODE] and [2CH/A.DIRECT]
The command mode of the remote-commander which this set re-
ceives can be changed.
Procedure:
1. While pressing the [INPUT MODE] and [2CH/A.DIRECT]
buttons, press the [
?/1
] button to turn on the main power.
2. Either the message “C.MODE.AV1” or “C.MODE.AV2” ap-
pears. Select the desired mode.
USER INITIALIZE
Procedure:
1. Hold the [
Procedure:
1. Hold the [
?/1
] for 5 seconds.
2. The message “CLEARING” appears on the display.
3. After a few seconds, “CLEARED” appears.
3. After a few seconds, “CLEARED” appears.
Click on the first or last page to see other STR-DH510 service manuals if exist.