STR-DH100 - Sony Audio Service Manual (repair manual). Page 10

Read Sony STR-DH100 Service Manual online

STR-DH100
10
SECTION  3
TEST  MODE
AM CHANNEL STEP 9 kHz/10 kHz SELECTION MODE
(US, Canadian model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM 
channel step.
* Procedure:
1.  While depressing the [TUNING MODE] button, press the  
 
[
?/1
] button to turn on the main power.
2.  Either the message “9k STEP” or “10k STEP” appears for a  
 
moment and select the desired step.
VACUUM FLUORESCENT DISPLAY TEST MODE
* All fl uorescent segments are tested.
When this test is activated, all segments light on at the same time, 
then each segment lights on one after another.
* Procedure:
While depressing the [SPEAKER(OFF/A/B/A+B)] and the [DIS-
PLAY] buttons simultaneously, press the [
?/1
] button to turn on 
the main power.
1.  ALL segments light on.
2.  Turn the [INPUT SELECTOR] control, confi rm display.
3.  Turn the [INPUT SELECTOR] control, confi rm display.
4.  Turn the [INPUT SELECTOR] control, all segments light off.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
1.  While depressing the [SPEAKERS (OFF/A/B/A+B)] and the
 
[MUTING] buttons simultaneously, press the [
?/1
] button to  
 
turn on the main power.
2.  The model name, destination and the software version are dis 
 
played for a moment.
KEY CHECK MODE
* Button check
* Procedure:
1.  While depressing the [SPEAKERS (OFF/A/B/A+B)] and the 
 
[DIMMER] buttons simultaneously, press the [
?/1
] button to  
 
turn on the main power.
2.  Either the message “REST 13” appears.
3.  Every pressing of any button other than the [
?/1
] counts down 
 
the buttons. The buttons which are already counted once are  
 
not counted again. When all buttons are pressed “REST 00”  
 appears.
SHIPMENT MODE
All preset contents are reset to the default setting.
* Procedure:
1.  While depressing the [TUNING MODE] and the [MUTING] 
buttons simultaneously, press the power [
?/1
]  button to turn 
on the main power.
2.  “CLEARED” appears and switch off the set.
RE-BOX CLASSIFICATION TEST MODE
* Procedure:
1.  While pressing the [FM MODE] and the [DISPLAY] buttons 
simultaneously, press the power [
?/1
] button to turn on the 
main power.
2. “R.Bxx” 
appears.
3.  xx indicates number of times set powered on.
4.  Press any button or power off the set to release test mode.
HISTORY MODE
The state that the set is used is memorized.
* Procedure:
1.  While pressing the [TREBLE +] and [SPEAKERS (OFF/A/
B/A+B)] buttons, press the power [
?/1
] button to turn on the 
power and “HISTORY” is displayed.
2.  Each time the [↑]/[↓] buttons on the remote commander is 
pressed, the item is swithed in order as follows.
Item
Display
History
HISTORY
Count has many time 
protector happen
COUNT xx
Total single power on time
SxxxHxxM
Input function
FUNCTION
Volume
VOLxxxxx
Bass
BASS xxx
Treble
TREB xxx
Level information
Fx xxx
Total power on time
TxxxHxxM
Muting
MUTE xxx
Power on counter
(Rebox test mode)
RB xxxxx
Return to history
HISTORY
HP ON/OFF
HP xxx
PROTECTOR AUTO OF
* Procedure:
1.  While pressing the [TREBLE -] and [SPEAKERS (OFF/A/B/ 
 
A+B)] buttons, press the power [
?/1
] button to turn on the  
 main 
power. 
2.  “PROTEVER” appears and switch off the set.
L
SW
C
R
SL
S
SR
SBL SB SBR
LFE
SP A 
NEO:6
COAX
HDMI
S-AIR
DTS -ES
x
II
PL
RDS
CAT
96/24
MONO
ZONE 2
SLEEP
DEX
STD
D.RANGE
SAT
D D
D
OPT
dB
Hz
k
ft.
m
MHz
MEMORY
SP B
L
R
S
LFE
NEO:6
S-AIR
II
D
D.RANGE
SLEPP
k
m
MHz
SP B
D D
D D
SW
C
SL
SR
SBL SB SBR
DTS
CAT
RDS
ZONE2
PL X
ST
EX
OPT
dB
Hz
ft.
Page of 43
Display

Click on the first or last page to see other STR-DH100 service manuals if exist.