Read Sony STR-DG810 Service Manual online
2
STR-DG810
1) Measured under the following conditions:
Area code
Power requirements
US
120 V AC, 60 Hz
2) Reference power output for front, center, surround and
surround back speakers. Depending on the sound field
settings and the source, there may be no sound output.
settings and the source, there may be no sound output.
Frequency response
Analog
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer bypassed)
+0.5/–2 dB (with sound
field and equalizer bypassed)
Inputs
Analog
Sensitivity: 500 mV/
50 kohms
S/N
50 kohms
S/N
3)
: 96 dB
(A, 500 mV
4)
)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
(A, 20 kHz LPF)
Output (Analog)
AUDIO OUT
Voltage: 500 mV/10 kohms
SUB WOOFER
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±10 dB, 1 dB step
3) INPUT SHORT (with sound field and equalizer
bypassed).
4) Weighted network, input level.
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code US
With 10-kHz tuning scale: 530 – 1,710 kHz
With 10-kHz tuning scale: 530 – 1,710 kHz
5)
With 9-kHz tuning scale: 531 – 1,710 kHz
5)
Antenna
Loop antenna
Intermediate frequency
450 kHz
5) You can change the AM tuning scale to 9 kHz or 10 kHz.
After tuning in any AM station, turn off the receiver. While
holding down TUNING MODE, press ?/1. All preset
stations will be erased when you change the tuning scale.
To reset the scale to 10 kHz (or 9 kHz), repeat the
procedure.
holding down TUNING MODE, press ?/1. All preset
stations will be erased when you change the tuning scale.
To reset the scale to 10 kHz (or 9 kHz), repeat the
procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p/75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p/75 ohms
P
P
B
/C
B
: 0.7 Vp-p/
75 ohms
P
P
R
/C
R
: 0.7 Vp-p/
75 ohms
80 MHz HD Pass Through
80 MHz HD Pass Through
General
Power requirements
Area code
Power requirements
US
120 V AC, 60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT
5 V, 700 mA
Power consumption
Area code
Power consumption
US
250 W
Power consumption (during standby mode)
0.3 W (When “CONTROL”
in VIDEO menu is set to
“CTRL OFF”)
in VIDEO menu is set to
“CTRL OFF”)
AC outlets:
Area code
AC outlets
US
1 switch, 120 W/1A MAX
Dimensions (w/h/d) (Approx.)
430
× 157.5 × 316 mm
(16
7/8
× 6
2/8
× 12
4/8
inches) including
projecting parts and
controls
projecting parts and
controls
Mass (Approx.)
8.1 kg (17 lb 14 oz)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAP016 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1)
AM loop antenna (1)
Remote commander RM-AAP016 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1)
Design and specifications are subject to change
without notice.
without notice.
Click on the first or last page to see other STR-DG810 service manuals if exist.