Read Sony STR-DG700 Service Manual online
1
SERVICE MANUAL
AEP Model
UK Model
Australian Model
STR-DG700
MULTI CHANNEL AV RECEIVER
Amplifier section
Stereo Power Output
1)
, Reference Power Output
1) 2)
8 ohms 20 Hz – 20 kHz, THD 0.09 %
85 W + 85 W, 110 W/ch
8 ohms 1 kHz, THD 0.7 %
100 W + 100 W, 120 W/ch
8 ohms 1 kHz, THD 10 %
125 W + 125 W, 150 W/ch
1) Measured under the following conditions:
Area code
Power requirements
AEP, UK
230 V AC, 50 Hz
AUS
240 V AC, 50 Hz
2) Reference power output for front, center, surround
and surround back. Depending on the sound field
settings and thjxsource, there may be no sound output.
settings and thjxsource, there may be no sound output.
Frequency response
Analog
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and equalizer bypassed)
+0.5/–2 dB (with sound
field and equalizer bypassed)
SPECIFICATIONS
Inputs
Analog
Sensitivity: 500 mV/
50 kohms
S/N
50 kohms
S/N
3)
: 96 dB
(A, 500 mV
4)
)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT
Voltage: 500 mV/10 kohms
SUB WOOFER, SURROUND
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±6 dB, 1 dB step
3) INPUT SHORT (with sound field and equalizer
bypassed).
4) Weighted network, input level.
Ver. 1.0 2006. 04
9-887-177-01
2006D04-1
© 2006. 04
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, “Surround EX”, and the double-D
symbol are trademarks of Dolby Laboratories.
“DTS”, “DTS-ES”, “Neo:6”, and “DTS 96/24” are
trademarks of Digital Theater Systems, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
“Dolby”, “Pro Logic”, “Surround EX”, and the double-D
symbol are trademarks of Dolby Laboratories.
“DTS”, “DTS-ES”, “Neo:6”, and “DTS 96/24” are
trademarks of Digital Theater Systems, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
TM
) technology. HDMI,
the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
– Continued on next page –
Photo: Black type
2
STR-DG700
FM tuner section
Tuning range
87.5 – 108.0 MHz
Intermediate frequency
10.7 MHz
Useable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono/Stereo
76 dB/70 dB
Harmonic distortion at 1 kHz
Mono/Stereo
0.3%/0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
+0.5/–2 dB
AM tuner section
Tuning range
With 9-kHz tuning scale: 531 – 1,602 kHz
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
999 kHz)
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
P
B
/C
B
/B-Y: 0.7 Vp-p/
75 ohms
P
P
R
/C
R
/R-Y: 0.7 Vp-p/
75 ohms
80 MHz HD Pass Through
80 MHz HD Pass Through
General
Power requirements
Area code
Power requirements
AEP, UK
230 V AC, 50/60 Hz
AUS
240 V AC, 50 Hz
Power consumption
220 W
Power consumption (during standby mode)
0.2 W
AC outlets
1 switched, 100 W/0.4 A MAX
Dimensions (w/h/d) (Approx.)
430
×
157.5
×
316 mm
including projecting parts and
controls
controls
Mass (Approx.)
8.5 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAP011 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1)
AM loop antenna (1)
Remote commander RM-AAP011 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1)
Design and specifications are subject to change
without notice.
without notice.
• Abbreviation
AUS : Australian model
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
MODEL IDENTIFICATION
— BACK PANEL —
Part No.
MODEL
PART No.
AEP, UK
2-661-147-7s
AUS
2-661-147-8s
• Abbreviation
AUS : Australian model
3
STR-DG700
TABLE OF CONTENTS
1. GENERAL
Description and location of parts ............................................. 4
2. DISASSEMBLY
2-1. Case ..................................................................................... 7
2-2. Back Panel Section .............................................................. 8
2-3. Front Panel Section ............................................................. 8
2-4. DIGITAL Board .................................................................. 9
2-5. MAIN Board Section .......................................................... 9
2-6. STANDBY Board ............................................................. 10
2-7. REGULATOR Board ........................................................ 10
2-2. Back Panel Section .............................................................. 8
2-3. Front Panel Section ............................................................. 8
2-4. DIGITAL Board .................................................................. 9
2-5. MAIN Board Section .......................................................... 9
2-6. STANDBY Board ............................................................. 10
2-7. REGULATOR Board ........................................................ 10
3. TEST MODE
..................................................................... 11
4. DIAGRAMS
4-1. Circuit Boards Location .................................................... 12
4-2. Block Diagram – Tuner/Audio Section – .......................... 13
4-3. Block Diagram – Digital Section – ................................... 14
4-4. Block Diagram – Video Section – ..................................... 15
4-5. Block Diagram – Key/Display/HDMI Section – .............. 16
4-6. Block Diagram – Power Section – .................................... 17
4-7. Printed Wiring Boards – Main Section – .......................... 19
4-8. Schematic Diagram – Main Section (1/3) – ...................... 20
4-9. Schematic Diagram – Main Section (2/3) – ...................... 21
4-10. Schematic Diagram – Main Section (3/3) – ...................... 22
4-11. Printed Wiring Board – Digital Section (1/2) – ................ 23
4-12. Printed Wiring Board – Digital Section (2/2) – ................ 24
4-13. Schematic Diagram – Digital Section (1/5) – ................... 25
4-14. Schematic Diagram – Digital Section (2/5) – ................... 26
4-15. Schematic Diagram – Digital Section (3/5) – ................... 27
4-16. Schematic Diagram – Digital Section (4/5) – ................... 28
4-17. Schematic Diagram – Digital Section (5/5) – ................... 29
4-18. Printed Wiring Boards
4-2. Block Diagram – Tuner/Audio Section – .......................... 13
4-3. Block Diagram – Digital Section – ................................... 14
4-4. Block Diagram – Video Section – ..................................... 15
4-5. Block Diagram – Key/Display/HDMI Section – .............. 16
4-6. Block Diagram – Power Section – .................................... 17
4-7. Printed Wiring Boards – Main Section – .......................... 19
4-8. Schematic Diagram – Main Section (1/3) – ...................... 20
4-9. Schematic Diagram – Main Section (2/3) – ...................... 21
4-10. Schematic Diagram – Main Section (3/3) – ...................... 22
4-11. Printed Wiring Board – Digital Section (1/2) – ................ 23
4-12. Printed Wiring Board – Digital Section (2/2) – ................ 24
4-13. Schematic Diagram – Digital Section (1/5) – ................... 25
4-14. Schematic Diagram – Digital Section (2/5) – ................... 26
4-15. Schematic Diagram – Digital Section (3/5) – ................... 27
4-16. Schematic Diagram – Digital Section (4/5) – ................... 28
4-17. Schematic Diagram – Digital Section (5/5) – ................... 29
4-18. Printed Wiring Boards
– Front B/Center/Surround Back Speaker Section – ........ 30
4-19. Schematic Diagram
– Front B/Center/Surround Back Speaker Section – ........ 31
4-20. Printed Wiring Board – Video Section (1/2) – .................. 32
4-21. Printed Wiring Board – Video Section (2/2) – .................. 33
4-22. Schematic Diagram – Video Section (1/2) – ..................... 34
4-23. Schematic Diagram – Video Section (2/2) – ..................... 35
4-24. Printed Wiring Boards
4-21. Printed Wiring Board – Video Section (2/2) – .................. 33
4-22. Schematic Diagram – Video Section (1/2) – ..................... 34
4-23. Schematic Diagram – Video Section (2/2) – ..................... 35
4-24. Printed Wiring Boards
– S-video/Video3/REG Section – ..................................... 36
4-25. Schematic Diagram
– S-video/Video3/REG Section – ..................................... 37
4-26. Printed Wiring Board – HDMI Section – .......................... 38
4-27. Schematic Diagram – HDMI Section – ............................ 39
4-28. Printed Wiring Board – ADCC Section – ......................... 40
4-29. Schematic Diagram – ADCC Section – ............................ 40
4-30. Printed Wiring Boards – Display Section – ...................... 41
4-31. Schematic Diagram – Display Section – ........................... 42
4-32. Printed Wiring Boards – Power Section – ......................... 43
4-33. Schematic Diagram – Power Section – ............................. 44
4-27. Schematic Diagram – HDMI Section – ............................ 39
4-28. Printed Wiring Board – ADCC Section – ......................... 40
4-29. Schematic Diagram – ADCC Section – ............................ 40
4-30. Printed Wiring Boards – Display Section – ...................... 41
4-31. Schematic Diagram – Display Section – ........................... 42
4-32. Printed Wiring Boards – Power Section – ......................... 43
4-33. Schematic Diagram – Power Section – ............................. 44
5. EXPLODED VIEWS
5-1. Case Section ...................................................................... 58
5-2. Front Panel Section ........................................................... 59
5-3. Back Panel Section ............................................................ 60
5-4. Chassis Section ................................................................. 61
5-2. Front Panel Section ........................................................... 59
5-3. Back Panel Section ............................................................ 60
5-4. Chassis Section ................................................................. 61
6. ELECTRICAL PARTS LIST
........................................ 62
4
STR-DG700
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
4
GB
Description and location of parts
To remove the cover
Press PUSH.
When you remove the cover, keep it out of
reach from children.
When you remove the cover, keep it out of
reach from children.
Getting Started
Front panel
?/1
AUTO CAL MIC
SPEAKERS
(OFF/A/B/A+B)
PHONES
MEMORY/
ENTER
SUR BACK
DECODING
DECODING
2CH
SLEEP
DIMMER
A.F.D.
MOVIE
MUSIC
MULTI CHANNEL DECODING
TUNING MODE
DISPLAY
INPUT MODE
INPUT SELECTOR
TUNING
–
+
MULTI CH IN
DIRECT
MASTER VOLUME
VIDEO 3 IN/PORTABLE AV IN
VIDEO
L AUDIO R
DIGITAL(OPT)
PUSH
1
5
2
6
8
q;
4
3
9
7
qa
qs
wd
qd
qf
wa
ws
qg
qh
qj
qk
ql
w;
Name
Function
A ?
/
1
Press to turn the receiver
on or off (page 29, 36, 37,
57, 59).
on or off (page 29, 36, 37,
57, 59).
B
SPEAKERS
(OFF/A/B/A+B)
(OFF/A/B/A+B)
Press to select OFF, A, B,
A+B of the front speakers
(page 30).
A+B of the front speakers
(page 30).
C
TUNING MODE
Press to select the tuning
mode (page 58, 62).
mode (page 58, 62).
D
TUNING +/–
Turn to scan a station
(page 58, 61).
(page 58, 61).
E
Display
The current status of the
selected component or a
list of selectable items
appears here (page 6).
selected component or a
list of selectable items
appears here (page 6).
5
GB
Gettin
g
Sta
rted
Name
Function
F
MULTI CHANNEL
DECODING lamp
DECODING lamp
Lights up when multi
channel audio is decoded
(page 37).
channel audio is decoded
(page 37).
G
Remote sensor
Receives signals from
remote commander.
remote commander.
H
DISPLAY
Press to select information
displayed on the display
(page 63, 67).
displayed on the display
(page 63, 67).
I
INPUT MODE
Press to select the input
mode when the same
components are connected
to both digital and analog
jacks (page 64).
mode when the same
components are connected
to both digital and analog
jacks (page 64).
J
MASTER
VOLUME
VOLUME
Turn to adjust the volume
level of all speakers at the
same time (page 34, 35,
36, 37).
level of all speakers at the
same time (page 34, 35,
36, 37).
K
DIRECT
Press to listen to high
quality analog sound
(page 56).
quality analog sound
(page 56).
L
MULTI CH IN
Press to select the audio
directly from the
components connected to
the MULTI CH IN jacks
(page 35).
directly from the
components connected to
the MULTI CH IN jacks
(page 35).
M
INPUT
SELECTOR
SELECTOR
Turn to select the input
source to playback (page
35, 36, 37, 56, 58, 62, 64,
67, 68, 69).
source to playback (page
35, 36, 37, 56, 58, 62, 64,
67, 68, 69).
N
MOVIE,
MUSIC
Press to select sound fields
(MOVIE, MUSIC) (page
53).
(MOVIE, MUSIC) (page
53).
O
A.F.D.
Press to select A.F.D.
mode (page 51).
mode (page 51).
P
2CH
Press to select 2CH
STEREO mode (page 56,
57).
STEREO mode (page 56,
57).
Q
SUR BACK
DECODING
DECODING
Press to select the
surround back decoding
mode (page 44).
surround back decoding
mode (page 44).
R
SLEEP
Press to activate the Sleep
Timer function and the
duration which the
receiver turns off
automatically (page 68).
Timer function and the
duration which the
receiver turns off
automatically (page 68).
S
DIMMER
Press to change the
brightness of the display
(page 50).
brightness of the display
(page 50).
Name
Function
T
MEMORY/ENTER
Press to store a station or
enter the selection when
selecting the settings
(page 29, 60).
enter the selection when
selecting the settings
(page 29, 60).
U
VIDEO 3 IN/
PORTABLE AV IN
jacks
PORTABLE AV IN
jacks
To connect a camcorder or
video game (page 27, 35).
video game (page 27, 35).
V
AUTO CAL MIC
jack
jack
Connects to the supplied
ECM-AC2 optimizer
microphone for the Auto
Calibration function (page
31).
ECM-AC2 optimizer
microphone for the Auto
Calibration function (page
31).
W
PHONES jack
Connects to a headphone
(page 77).
(page 77).
6
GB
About the indicators on the display
MEMORY
L
C
R
SL
S
SR
SB
SW
LFE
SP A
SP B
SP B
RDS
STEREO MONO
A.DIRECT
D.RANGE EQ
NEO:6
SLEEP OPT COAX
HDMI
96/24
DIGITAL EX
;
DTS-ES
;
PRO LOGIC IIx
qd
qs
qa
qj
qk
qg
qh
qf
2
1
4
3
5
6
7
8
9
q;
Name
Function
A
SW
Lights up when sub woofer
selection is set to “YES” (page
41) and the audio signal is
output from the SUB WOOFER
jack.
selection is set to “YES” (page
41) and the audio signal is
output from the SUB WOOFER
jack.
B
LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C
SP A/SP B
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if a headphone is
connected.
D ;
DIGITAL
(EX)
Lights up when Dolby Digital
signals are input. “;
DIGITAL EX” lights up when
Dolby Digital Surround EX
signals are decoded.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 64).
signals are input. “;
DIGITAL EX” lights up when
Dolby Digital Surround EX
signals are decoded.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 64).
Name
Function
E ;
PRO
LOGIC (II)/
(IIx)
(IIx)
Lights up when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals. “; PRO
LOGIC II” lights up when the
Pro Logic II Movie/Music/
Game decoder is activated.
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals. “; PRO
LOGIC II” lights up when the
Pro Logic II Movie/Music/
Game decoder is activated.
“; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/
Music/Game decoder is
activated. However, these
indicators do not light up if both
the center and surround
speakers are set to “NO” (page
41) and you select a sound field
using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding
does not function for DTS
format signals or for signals
with a sampling frequency of
more than 48 kHz.
when the Pro Logic IIx Movie/
Music/Game decoder is
activated. However, these
indicators do not light up if both
the center and surround
speakers are set to “NO” (page
41) and you select a sound field
using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding
does not function for DTS
format signals or for signals
with a sampling frequency of
more than 48 kHz.
F
DTS (-ES)/
(96/24)
(96/24)
Lights up when DTS signals are
input. “DTS-ES” lights up
when DTS-ES signals are input.
input. “DTS-ES” lights up
when DTS-ES signals are input.
“DTS 96/24” lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 64).
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 64).
G
NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 52).
Cinema/Music decoder is
activated (page 52).
7
GB
Gettin
g Sta
rted
Name
Function
H
MEMORY
Lights up when a memory
function, such as Preset
Memory (page 61), etc., is
activated.
function, such as Preset
Memory (page 61), etc., is
activated.
I
A.DIRECT
Lights up when ANALOG
DIRECT is selected (page 56).
DIRECT is selected (page 56).
J
Preset
station
indicators
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 60.
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 60.
K
Tuner
indicators
indicators
Lights up when using the
receiver to tune in radio stations
(page 57), etc.
Note
“RDS” appears for models of
area code CEL, CEK only.
receiver to tune in radio stations
(page 57), etc.
Note
“RDS” appears for models of
area code CEL, CEK only.
L
EQ
Lights up when the equalizer is
activated (page 39).
activated (page 39).
M
D.RANGE
Lights up when dynamic range
compression is activated (page
39).
compression is activated (page
39).
N
HDMI
Flashes when you select
“HDMI A.” in the VIDEO
menu (page 66).
“HDMI A.” in the VIDEO
menu (page 66).
O
COAX
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack, or when INPUT MODE is
set to “COAX IN” (page 64).
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack, or when INPUT MODE is
set to “COAX IN” (page 64).
P
OPT
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack, or when INPUT MODE is
set to “OPT IN” (page 64).
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack, or when INPUT MODE is
set to “OPT IN” (page 64).
Q
SLEEP
Lights up when the sleep timer
is activated (page 68).
is activated (page 68).
Name
Function
R
Playback
channel
indicators
channel
indicators
L
R
C
SL
SR
S
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When surround
speaker is set to “NO” (page 41)
Sound Field: A.F.D. AUTO
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When surround
speaker is set to “NO” (page 41)
Sound Field: A.F.D. AUTO
L
C
R
SL
SR
SW