Read Sony STR-DG520 Service Manual online
STR-DG520
2
1) Measured under the following conditions:
Area code
Power requirements
US, CND
120 V AC, 60 Hz
AEP, UK, ECE
230 V AC, 50 Hz
AUS
240 V AC, 50 Hz
TW
110 V AC, 60 Hz
2) Reference power output for front, center and surround speakers.
Depending on the sound fi eld settings and the source, there may be
no sound output.
Depending on the sound fi eld settings and the source, there may be
no sound output.
Frequency response
Analog
Analog
10 Hz – 70 kHz
+0.5/–2 dB (with sound
fi eld and tone bypassed)
Inputs
Analog
Analog
Sensitivity: 500 mV/
50
kohms
S/N 3) : 96 dB
(A, 500 mV
4)
)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
Output (Analog)
AUDIO OUT
AUDIO OUT
Voltage: 500 mV/10 kohms
SUB WOOFER
Voltage: 2 V/1 kohm
Tone
Gain levels
Gain levels
±6 dB, 1 dB step
3) INPUT SHORT (with sound fi eld and tone bypassed).
4) Weighted network, input level.
FM tuner section
Tuning range
Tuning range
87.5 – 108.0 MHz
Antenna FM
wire
antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code US, CND
With 10-kHz tuning scale:
Tuning range
Models of area code US, CND
With 10-kHz tuning scale:
530 – 1,710 kHz
5)
With 9-kHz tuning scale:
531 – 1,710 kHz
5)
Models of area code AEP, UK, AUS, ECE, TW
With 9-kHz tuning scale:
With 9-kHz tuning scale:
531 – 1,602 kHz
Antenna Loop
antenna
Intermediate frequency
450 kHz
5) You can change the AM tuning scale to 9 kHz or 10 kHz.After tuning
in any AM station, turn off the receiver. While holding down TUNING
MODE,
in any AM station, turn off the receiver. While holding down TUNING
MODE,
press
?/1. All preset stations will be erased when you change
the tuning scale.To reset the scale to 10 kHz (or 9 kHz), repeat the
procedure.
procedure.
Video section
Inputs/Outputs
Video:
Inputs/Outputs
Video:
1
Vp-p/75
ohms
COMPONENT VIDEO:
Y: 1 Vp-p/75 ohms
P
B
/C
B
: 0.7 Vp-p/
75
ohms
P
R
/C
R
: 0.7 Vp-p/
75
ohms
80 MHz HD Pass Through
General
Power requirements
Area code
Power requirements
US, CND
120 V AC, 60 Hz
AEP, UK, ECE
230 V AC, 50/60 Hz
AUS
240 V AC, 50 Hz
TW
110 V AC, 60 Hz
Power output (DIGTAL MEDIA PORT)
DC OUT :
DC OUT :
5 V, 0.7 A MAX
Power consumption
Area code
Power consumption
US, AEP, UK, AUS, ECE
220 W
CND 300
VA
TW 500
W
Power consumption (during standby mode)
0.3
W
Dimensions (w/h/d) (Approx.)
430 × 157.5 × 318 mm
(16
7/8
× 6
2/8
× 12
5/8
inches) including
projecting parts and controls
Mass (Approx.)
7.7 kg (16 lb 16 oz)
Supplied accessories
Operating Instruction (1)
Quick Setup Guide (1)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Remote commander RM-AAU020 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1) (AEP, UK, AUS, ECE, TW)
Operating Instruction (1)
Quick Setup Guide (1)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Remote commander RM-AAU020 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1) (AEP, UK, AUS, ECE, TW)
Design and specifi cations are subject to change without notice.
• Abbreviation
AUS :
AUS :
Australian
model
CND :
Canadian
model
ECE :
Continental
European,
East European and
Russian models
TW :
Taiwan
model
Ver. 1.1
Click on the first or last page to see other STR-DG520 service manuals if exist.