STR-DG510 - Sony Audio Service Manual (repair manual). Page 2

2

Models of area code MY, SP, TH

 1)

Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)

60 W + 60 W

Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)

80 W + 80 W

Surround Mode Output Power

 2)

 (8 ohms, 1 kHz,

THD 10%)

120 W/ch

1) Measured under the following conditions:

Area code

Power requirements

US, CND

120 V AC, 60 Hz

AEP, UK, MY, SP, TH

230 V AC, 50 Hz

E2, AUS

240 V AC, 50 Hz

TW

110 V AC, 60 Hz

KR

220 V AC, 60 Hz

2) Reference power output for front, center and surround

speakers. Depending on the sound field settings and the
source, there may be no sound output.

Frequency response

Analog

10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)

Inputs

Analog

Sensitivity: 500 mV/
50 kohms
S/N

 3)

 : 96 dB

(A, 500 mV

 4)

 )

Digital (Coaxial)

Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)

Digital (Optical)

S/N: 100 dB
(A, 20 kHz LPF)

Output (Analog)

AUDIO OUT

Voltage: 500 mV/10 kohms

SUB WOOFER

Voltage: 2 V/1 kohm

Tone

Gain levels

±6 dB, 1 dB step

3) INPUT SHORT (with sound field and tone bypassed).

4) Weighted network, input level.

Tuning range

87.5 – 108.0 MHz

Antenna

FM wire antenna

Antenna terminals

75 ohms, unbalanced

Intermediate frequency

10.7 MHz

Tuning range

Models of area code US, CND
With 10-kHz tuning scale: 530 – 1,710 kHz

 5)

With 9-kHz tuning scale: 531 – 1,710 kHz

 5)

Models of area code AEP, UK, AUS, KR, MY, SP,
TH, TW
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code E2
With 10-kHz tuning scale: 530 – 1,610 kHz

 5)

With 9-kHz tuning scale: 531 – 1,602 kHz

 5)

Antenna

Loop antenna

Intermediate frequency

450 kHz

5) You can change the AM tuning scale to 9 kHz or 10 kHz.

After tuning in any AM station, turn off the receiver. While
holding down TUNING MODE, press ?/1. All preset
stations will be erased when you change the tuning scale.
To reset the scale to 10 kHz (or 9 kHz), repeat the
procedure.

Inputs/Outputs

Video:

1 Vp-p/75 ohms

COMPONENT VIDEO:

Y: 1 Vp-p/75 ohms
P

B

/C

B

: 0.7 Vp-p/

75 ohms
P

R

/C

R

: 0.7 Vp-p/

75 ohms
80 MHz HD Pass Through

Power requirements

Area code

Power requirements

US, CND

120 V AC, 60 Hz

AEP, UK

230 V AC, 50/60 Hz

E2

120/220/240 V AC, 50/60 Hz

AUS

240 V AC, 50 Hz

MY, SP, TH

230 – 240 V AC, 50/60 Hz

KR

220 – 230 V AC, 50/60 Hz

TW

110 V AC, 60 Hz

Power consumption

Area code

Power consumption

US, AEP, UK, E2, AUS, KR 220 W
CND

300 VA

MY, SP, TH

200 W

TW

500 W

Power consumption (during standby mode)

0.3 W

Dimensions (w/h/d) (Approx.)

430 

× 157.5 × 310 mm

(16 

7/8

 

× 6 

2/8

 

× 12 

2/8

inches) including
projecting parts and
controls

Mass (Approx.)

7.7 kg (16 lb 16 oz)

Supplied accessories

FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Remote commander RM-AAU013 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1)

Design and specifications are subject to change
without notice.

• Abbreviation

CND : Canadian model
AUS : Australian model
E2

: 120 V AC area in E model

KR

: Korea model

MY : Malaysia model
SP

: Singapore model

TH

: Thai model

TW : Taiwan model