Read Sony STR-DE898 / STR-DE998 Service Manual online
1
SERVICE MANUAL
US Model
Canadian Model
STR-DE898/DE998
E Model
Australian Model
STR-DE898
STR-DE898/DE998
FM STEREO/FM-AM RECEIVER
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code US only)
DISTORTION:
(Models of area code US only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts (STR-DE898)/
110 watts (STR-DE998) per channel minimum
RMS power, with no more than 0.09 % total
harmonic distortion from 250 milliwatts to
rated output.
20 – 20,000 Hz; rated 100 watts (STR-DE898)/
110 watts (STR-DE998) per channel minimum
RMS power, with no more than 0.09 % total
harmonic distortion from 250 milliwatts to
rated output.
Amplifier section
Power Output
Models of area code STR-DE898: US, CND
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
1)
(8 ohms 1 kHz, THD 0.7 %)
110 W + 110 W
1)
(8 ohms 1 kHz, THD 10 %)
140 W + 140 W
1)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
SURR BACK
2)
: 100 W/ch
(8 ohms 1 kHz, THD 0.7 %)
FRONT
2)
: 110 W/ch
CENTER
2)
: 110 W
SURR
2)
: 110 W/ch
SURR BACK
2)
: 110 W/ch
(8 ohms 1 kHz, THD 10 %)
FRONT
2)
: 140 W/ch
CENTER
2)
: 140 W
SURR
2)
: 140 W/ch
SURR BACK
2)
: 140 W/ch
SPECIFICATIONS
Models of area code E2
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
90 W + 90 W
1)
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
1)
(8 ohms 1 kHz, THD 10 %)
125 W + 125 W
1)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
2)
: 115 W/ch
CENTER
2)
: 115 W
SURR
2)
: 115 W/ch
SURR BACK
2)
: 115 W/ch
(8 ohms 1 kHz, THD 0.7 %)
FRONT
2)
: 125 W/ch
CENTER
2)
: 125 W
SURR
2)
: 125 W/ch
SURR BACK
2)
: 125 W/ch
(8 ohms 1 kHz, THD 10 %)
FRONT
2)
: 155 W/ch
CENTER
2)
: 155 W
SURR
2)
: 155 W/ch
SURR BACK
2)
: 155 W/ch
Ver. 1.1 2005. 07
9-879-624-02
2005G04-1
© 2005. 07
Sony Corporation
Audio Group
Published by Sony Engineering Corporation
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are
trademarks of Digital Theater Systems, Inc.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are
trademarks of Digital Theater Systems, Inc.
– Continued on next page –
Photo: STR-DE998
2
STR-DE898/DE998
Models of area code AUS, TW
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
90 W + 90 W
1)
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
1)
(8 ohms 1 kHz, THD 10 %)
130 W + 130 W
1)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
2)
: 115 W/ch
CENTER
2)
: 115 W
SURR
2)
: 115 W/ch
SURR BACK
2)
: 115 W/ch
(8 ohms 1 kHz, THD 0.7 %)
FRONT
2)
: 125 W/ch
CENTER
2)
: 125 W
SURR
2)
: 125 W/ch
SURR BACK
2)
: 125 W/ch
(8 ohms 1 kHz, THD 10 %)
FRONT
2)
: 155 W/ch
CENTER
2)
: 155 W
SURR
2)
: 155 W/ch
SURR BACK
2)
: 155 W/ch
Models of area code AR, KR
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
90 W + 90 W
1)
80 W + 80 W
3)
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
1)
95 W + 95 W
3)
(8 ohms 1 kHz, THD 10 %)
130 W + 130 W
1)
120 W + 120 W
3)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
2)
: 115 W/ch
CENTER
2)
: 115 W
SURR
2)
: 115 W/ch
SURR BACK
2)
: 115 W/ch
(8 ohms 1 kHz, THD 0.7 %)
FRONT
2)
: 125 W/ch
CENTER
2)
: 125 W
SURR
2)
: 125 W/ch
SURR BACK
2)
: 125 W/ch
(8 ohms 1 kHz, THD 10 %)
FRONT
2)
: 155 W/ch
CENTER
2)
: 155 W
SURR
2)
: 155 W/ch
SURR BACK
2)
: 155 W/ch
Models of area code SP, MY
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
80 W + 80 W
1)
75 W + 75 W
3)
(8 ohms 1 kHz, THD 0.7 %)
90 W + 90 W
1)
80 W + 80 W
3)
(8 ohms 1 kHz, THD 10 %)
120 W + 120 W
1)
110 W + 110 W
3)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
SURR BACK
2)
: 100 W/ch
(8 ohms 1 kHz, THD 0.7 %)
FRONT
2)
: 110 W/ch
CENTER
2)
: 110 W
SURR
2)
: 110 W/ch
SURR BACK
2)
: 110 W/ch
(8 ohms 1 kHz, THD 10 %)
FRONT
2)
: 140 W/ch
CENTER
2)
: 140 W
SURR
2)
: 140 W/ch
SURR BACK
2)
: 140 W/ch
Models of area code STR-DE998: US, CND
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
110 W + 110 W
1)
(8 ohms 1 kHz, THD 0.7 %)
120 W + 120 W
1)
(8 ohms 1 kHz, THD 10 %)
150 W + 150 W
1)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
2)
: 110 W/ch
CENTER
2)
: 110 W
SURR
2)
: 110 W/ch
SURR BACK
2)
: 110 W/ch
(8 ohms 1 kHz, THD 0.7 %)
FRONT
2)
: 120 W/ch
CENTER
2)
: 120 W
SURR
2)
: 120 W/ch
SURR BACK
2)
: 120 W/ch
(8 ohms 1 kHz, THD 10 %)
FRONT
2)
: 150 W/ch
CENTER
2)
: 150 W
SURR
2)
: 150 W/ch
SURR BACK
2)
: 150 W/ch
1) Measured under the following conditions:
Area code
Power requirements
US, CND
120 V AC, 60 Hz
E2 , AUS
240 V AC, 50 Hz
AR, SP, MY, KR
230 V AC, 50 Hz
TW
110 V AC, 60 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
3) Measured under the following conditions:
Area code
Power requirements
AR, SP, MY, KR
220 V AC, 50 Hz
Frequency response
PHONO
RIAA equalization curve
±0.5 dB
±0.5 dB
MULTI CH IN,
10 Hz – 70 kHz
SA-CD/CD, TV/SAT,
+0.5/–2 dB (with sound
MD/TAPE, DVD,
field and equalizer
VIDEO 1, 2, 3
bypassed)
Inputs (Analog)
PHONO
Sensitivity: 8 mV
Impedance: 50 k ohms
S/N
Impedance: 50 k ohms
S/N
4)
: 86 dB
(A, 8 mV
5)
)
MULTI CH IN,
Sensitivity: 500 mV
SA-CD/CD, TV/SAT,
Impedance: 50 k ohms
MD/TAPE, DVD,
S/N
4)
: 96 dB
VIDEO 1, 2, 3
(A, 500 mV
5)
)
4) INPUT SHORT (with sound field and equalizer
bypassed).
5) Weighted network, input level.
Inputs (Digital)
DVD, SA-CD/CD
Sensitivity: –
(Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
S/N: 100 dB
(A, 20 kHz LPF)
TV/SAT, SA-CD/CD,
Sensitivity: –
MD/TAPE, VIDEO 3
Impedance: –
(Optical)
S/N: 100 dB
(A, 20 kHz LPF)
(A, 20 kHz LPF)
Outputs (Analog)
MD/TAPE (OUT),
Voltage: 500 mV
VIDEO 1, 2
Impedance: 10 k ohms
(AUDIO OUT)
SUB WOOFER
Voltage: 2 V
Impedance: 1 k ohm
Impedance: 1 k ohm
Outputs (Digital)
MD/TAPE (Optical)
Sensitivity: –
Equalizer
Gain levels
Gain levels
±10 dB, 0.5 dB step
Ver. 1.1
3
STR-DE898/DE998
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf, 2.2 µV/75 ohms
Stereo:
38.3 dBf, 22.5 µV/75 ohms
Useable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code US, CND
With 10-kHz tuning scale: 530 – 1,710 kHz
With 10-kHz tuning scale: 530 – 1,710 kHz
6)
With 9-kHz tuning scale: 531 – 1,710 kHz
6)
Models of area code E2
With 10-kHz tuning scale: 530 – 1,610 kHz
With 10-kHz tuning scale: 530 – 1,610 kHz
6)
With 9-kHz tuning scale: 531 – 1,602 kHz
6)
Models of area code AR
With 10-kHz tuning scale: 530 – 1,610 kHz
Models of area code AUS, SP, MY, KR, TW
With 9-kHz tuning scale: 531 – 1,602 kHz
With 10-kHz tuning scale: 530 – 1,610 kHz
Models of area code AUS, SP, MY, KR, TW
With 9-kHz tuning scale: 531 – 1,602 kHz
Antenna
Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz:
40 dB
6) You can change the AM tuning scale to 9 kHz or 10 kHz.
After tuning in any AM station, turn off the receiver. While
holding down PRESET TUNING + or TUNING +, press
?/1. All preset stations will be erased when you change
the tuning scale. To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure.
holding down PRESET TUNING + or TUNING +, press
?/1. All preset stations will be erased when you change
the tuning scale. To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
P
B
/C
B
/B-Y: 0.7 Vp-p,
75 ohms
P
P
R
/C
R
/R-Y: 0.7 Vp-p,
75 ohms
80 MHz HD Pass Through
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES
SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT.
NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES
SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL
OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT.
NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES
SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL
OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
General
Power requirements
Area code
Power requirements
US, CND
120 V AC, 60 Hz
E2
120/220/240 V AC,
50/60 Hz
50/60 Hz
AUS
240 V AC, 50 Hz
AR, SP, MY, KR
220 – 230 V AC, 50/60 Hz
TW
110 V AC, 50/60 Hz
Power consumption
Area code
Power consumption
STR-DE898: US, E2
300 W
STR-DE998: US
310 W
STR-DE898: CND
410 VA
STR-DE998: CND
420 VA
AR, AUS, KR
270 W
SP, MY
230 W
TW
550 W
Power consumption (during standby mode)
0.3 W
AC outlets
(Except for models of area code AR, KR, TW)
(Except for models of area code AR, KR, TW)
Area code
AC outlets
US, CND
2 switched,
120 W/1A MAX
120 W/1A MAX
E2, AUS, SP, MY
1 switched, 100 W MAX
Dimensions (w/h/d) (Approx.)
STR-DE898:
STR-DE898:
430
× 157.5 × 371 mm
(16
7/8
× 6
2/8
× 14
5/8
inches) including
projecting parts and
controls
projecting parts and
controls
STR-DE998:
430
× 157.5 × 402 mm
(16
7/8
× 6
2/8
× 15
7/8
inches) including
projecting parts and
controls
projecting parts and
controls
Mass (Approx.)
STR-DE898:
STR-DE898:
10.5 kg (23 lb 3 oz)
STR-DE998:
13.5 kg (29 lb 13 oz)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAL001 (1)
(STR-DE898: US, CND, E2, AR)
Remote commander RM-AAE001 (1) (STR-DE998)
Remote commander RM-AAP002 (1)
(STR-DE898: AUS, SP, MY, KR, TW)
R6 (size-AA) batteries (2)
AM loop antenna (1)
Remote commander RM-AAL001 (1)
(STR-DE898: US, CND, E2, AR)
Remote commander RM-AAE001 (1) (STR-DE998)
Remote commander RM-AAP002 (1)
(STR-DE898: AUS, SP, MY, KR, TW)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
without notice.
• Abbreviation
CND : Canadian model
E2
E2
: AC 120 V area in E model
AR
: Argentina model
AUS : Australian model
SP
SP
: Singapore model
MY : Malaysia model
KR
KR
: Korean model
TW : Taiwan model
Ver. 1.1
4
STR-DE898/DE998
MODEL IDENTIFICATION
— BACK PANEL —
MODEL
PART No.
STR-DE898: US
2-514-879-0s
STR-DE898: CND
2-514-879-1s
STR-DE898: SP, MY
2-514-879-2s
STR-DE898: AUS
2-514-879-3s
STR-DE898: E2
2-514-879-4s
STR-DE898: AR
2-514-879-5s
STR-DE898: TW
2-514-879-7s
STR-DE898: KR
2-514-879-8s
STR-DE998: US
2-580-905-0s
STR-DE998: CND
2-580-905-1s
• Abbreviation
CND: Canadian model
SP
SP
: Singapore model
MY : Malaysia model
AUS : Australian model
E2
AUS : Australian model
E2
: AC 120 V area in E model
AR : Argentina model
TW : Taiwan model
KR : Korean model
TW : Taiwan model
KR : Korean model
Part No.
1.5 k
Ω
0.15
µ
F
AC
voltmeter
(0.75 V)
voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Parts on Set
Earth Ground
SAFETY CHECK-OUT (US MODEL)
After correcting the original service problem, perform the follow-
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, screws,
and all other exposed metal parts for AC leakage.
Check leakage as described below.
ing safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, screws,
and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microampers.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microampers.).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
instruments.
2. A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indica-
tion is 0.75 V, so analog meters must have an accurate low-
voltage scale. The Simpson 250 and Sanwa SH-63Trd are ex-
amples of a passive VOM that is suitable. Nearly all battery
operated digital multimeters that have a 2 V AC range are suit-
able. (See Fig. A)
tion is 0.75 V, so analog meters must have an accurate low-
voltage scale. The Simpson 250 and Sanwa SH-63Trd are ex-
amples of a passive VOM that is suitable. Nearly all battery
operated digital multimeters that have a 2 V AC range are suit-
able. (See Fig. A)
Fig. A. Using an AC voltmeter to check AC leakage.
Ver. 1.1