STR-DE135 - Sony Audio Service Manual (repair manual). Page 2

Read Sony STR-DE135 Service Manual online

– 2 –
TABLE  OF  CONTENTS
1.
SERVICING  NOTES
...............................................
3
2.
GENERAL
...................................................................
4
3.
DISASSEMBLY
.........................................................
5
4.
TEST MODE
...............................................................
7
5.
DIAGRAMS
5-1. Note for Printed Wiring Boards and
Schematic Diagrams .......................................................
9
5-2. Printed Wiring Board  – MAIN Board – ........................ 11
5-3. Schematic Diagram  – MAIN Board (1/2) – .................. 13
5-4. Printed Wiring Boards
– DISPLAY Board/KEY Board/VOLUME Board/
   TONE Board/POWER SWITCH Board – ................... 15
5-5. Schematic Diagram
– PANEL Section – ......................................................... 19
5-6. Printed Wiring Boards
– PANEL Section – ......................................................... 23
5-7. Schematic Diagram
– MAIN Board (2/2)/SPK SWITCH Board/
   SECONDARY Board/PRIMARY Board/
   STANDBY TRANS Board – ....................................... 25
5-8. IC Pin Function Description ........................................... 26
6.
EXPLODED  VIEWS
................................................ 28
7.
ELECTRICAL  PARTS  LIST
............................... 31
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
!
  OR  DOTTED
LINE  WITH  MARK  
!
  ON  THE  SCHEMATIC  DIAGRAMS
AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.
Antenna
Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m, 400Hz)
Selectivity
At 10 kHz: 40 dB
At 9 kHz: 35 dB (US model)
35 dB (AEP, UK models)
* You can change the AM tuning interval between 9 kHz and 10kHz.
After tuning in any AM station, turn off the receiver. Hold down the
PRESET TUNING + button and press the 
1/u (power) button. All pre-
set stations will be erased when you change the interval. To reset the
interval, repeat the procedure.
(US model)
General
System
Tuner section:
PLL quartz-locked digital
synthesizer system
Preamplifier section:
Low-noise NF type equalizer
Power amplifier section:
Pure-complementary SEPP
Power requirements
120 V AC, 60 Hz (US model)
230 V AC, 50/60 Hz
(AEP, UK models)
Power consumption
155 W (US model)
135 W (AEP, UK models)
AC outlets
1 switched, total 120 W/1A Max
(US, UK models)
switch 100 W max (AEP model)
Dimensions
430 
×
 144 
×
 306 mm
(17 
× 5
6
/
8
 × 12
4
/
8
 inches)
Mass (Approx.)
8.1 kg (17 lb 13 oz) (US model)
6.7 kg (AEP, UK models)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander (remote) (1)
Size AA (R6) batteries (2)
Specifications indicated are measured at 230 V AC, 50Hz.
(AEP, UK models)
Design and specifications are subject to change without notice.
Page of 30
Display

Click on the first or last page to see other STR-DE135 service manuals if exist.