STR-DE1015G - Sony Audio Service Manual (repair manual). Page 4

— 4 —

Mode which erases all the user memories registered in this unit and
sets to setting at shipment.

Procedure:
1. With the power turned OFF, press the  POWER  button while

pressing the  MODE  button,  AUDIO FUNCTION >  and
VIDEO FUNCTION >  button simultaneously to turn ON the
power.

2. ALL CLEAR 3/5 will be displayed on the fluorescent indicator

tube, and ALL CLEAR will be executed.

Mode which sets the memory of the unit to the setting of adjust-
ment and check at factory. (Not used for servicing.)

Procedure:
1. With the power turned OFF, press the  POWER  button while

pressing the  MODE  button and  AUDIO FUNCTION >  button
simultaneously to turn ON the power.

2. FACTORY SET will be displayed on the fluorescent indicator

tube, and FACTORY SET will be executed.

Note: In case you return the unit to the customer, do not perform
FACTRY SET. If you do it, perform ALL CLEAR.

Procedure:
1. With the power turned OFF, press the  POWER  button while

pressing the  MODE  button and  VIDEO FUNCTION >  button
simultaneously to turn ON the power.

2. The fluorescent display tubes and LEDs will all light up. Re-

lease the buttons in the order of  VIDEO FUNCTION > , and
MODE .

3. The Fluorescent indicator tube display changes as follows by

pressing the  DPC MODE  .
(Pressing the other buttons will exit this mode.)

The position of the screen can be adjusted freely to correct the de-
viation of the OSD screen caused by the monitor type that users are
using.

1. Move the cursor of the remote commander supplied as an acces-

sory, and display the OSD screen.

2. Click the SET UP of the OSD screen.
3. Next click TV SET.
4. Next click GRAPHIC POSITION SET.
5. The screen for adjusting the OSD screen position will be dis-

played. Adjust the position with the remote commander supplied
as an accessory.

6. Click EXIT to end.

Method:
1. Turn ON the power, set the AUDIO FUNCTION to AM, and

turn OFF the power.

2. While pressing the  TUNING +  button or  PRESET TUNING +

button, press the  POWER  button.

3. “AM 9K STEP” or “AM 10k STEP” will be displayed on the FL

display tube.

9

Fluorescent indicator tube and all LEDs are OFF

9

Partial lighting of fluorescent indicator tube 2, LEDs are OFF *1

9

Partial lighting of fluorescent indicator tube 1, LEDs are OFF *1

9

Fluorescent indicator tubes, LEDs are all lit

• Press  DPC MODE  button.

• Press  DPC MODE  button.

• Press  DPC MODE  button.

9

• Press  DPC MODE  button.

*1 Those other than the POWER LED go OFF.

4. To exit the mode, press the  POWER  button to turn OFF the

power.

12345

AC-3 RF

DISCRETE   PRO   LOGIC   MONO   STEREO 

MEMORY

SOUND FIELD

DIGITAL