STR-DA5800ES - Sony Audio Service Manual (repair manual). Page 6

Note: When this confi rmation is executed, IP address is changed.

Necessary machinery and materials:
• 

PC (Windows XP/Vista)

• Router
 

(Transmission rate is 100 Mbps or more, built-in DHCP server 
function)

• 

Two LAN cables

 

(Category 5 cable, normal type or shield type)

• Monitor
• 

Supplied remote commander (RM-AAU154)

 

(US and Canadian models)

• 

Supplied multifunction remote commander (RM-AAL042)

 

(AEP, UK and Taiwan models)

Connection:
(The router need not be connected with the internet)

Procedure:
1.  The setting of LAN of PC is setting to the automatic IP address 

assignment. 

 

It changes to the setting that displays the image in the monitor.

2.  Perform connection with reference to connection fi gure.
3.  The power supply of the router is turn on, next, the power sup-

ply of PC and this unit is turn on.

4.  Press the [HOME] button of the remote commander, the home 

menu is displayed in the monitor.

5.  The “Settings” is selected on the home menu, and press the [

] 

button of remote commander.

6.  The “Network Settings” is selected , and press the [

] button 

of remote commander.

7.  The “Internet Settings” is selected , and press the [

] button of 

remote commander.

8.  The “Network Setup” is selected , and press the [

] button of 

remote commander.

9.  The “Auto” is selected , and press the [

] button of remote 

commander.

10. The “The network will be confi gured with the following set-

tings.” is displayed, and press the [

,

] button of remote com-

mander.

11.  The “Save & Connect” is selected , and press the [

] button of 

remote commander.

12. The automatically connect function is performed.
13. Confi rm that the “Internet Access:   OK” has been displayed,  

and press the [

] button of remote commander.

14. Press the [\/1] button to turn off the main power.

NOTE  OF  REPLACING  THE  COMPLETE NETWORK  
BOARD
When the complete NETWORK board is exchanged, the MAC ad-
dress has been changed.
Please print and cut out the following explanations, and return it 
with the unit that completes the repair.

MAC address of this receiver has been changed by this repair. 
The customer who uses the MAC address fi ltering function of 
connected access point equipment please set it again. MAC ad-
dress is possible to confi rm it on the System Information screen 
of this unit. Please refer to “Adjusting Settings” on the operating 
instructions for details.

NOTE  OF  REPLACING  THE  COMPLETE  USB-DDC  
BOARD (AEP, UK and Taiwan models only)
When this unit is connected with PC, this unit is recognized as a 
USB audio device on PC. At this time, the manufacture maker’s 
information, etc. (USB descriptor) are transmitted to PC from this 
unit. The USB descriptor is stored in the IC102 on the USB-DDC 
board, and it is written in at the factory.
When the complete USB-DDC board is exchanged, do the follow-
ing work.

1. Preparation
Prepare the following before beginning work.

• 

Windows PC (Windows XP)

Note 1: Vendor does not guarantee operation by other OS’s.

• 

Driver software for STR-DA5800ES

Note 2: Install this driver software in the above PC in advance. Confi rm 

the method of obtaining the driver software to each service head-

quarters.

• 

USB cable (A type plug to B type plug)

• 

Writing utility software (.exe fi le)

• 

USB descriptor defi nition fi le (.hex fi le)

Note 3: Confi rm the method of obtaining the writing utility software and 

USB descriptor defi nition fi le to each service headquarters.

Procedure:
1.  Assemble new USB-DDC board to this unit.
2.  Connect PC and this set with USB cable.

3.  Press the [\/1] button on this unit to turn on the main power.
 

(It is not necessary to wait for memory clearing)

4. Run 

the 

writing utility software on PC.

5.  Select the “USB\Vid_0d8c&Pid_5200&Rev_0100” on “De-

vice menu” pull-down list of the writing utility software.

USB/Vid_0d8c&Pid_5200&Rev_0100