Read Sony STR-DA5800ES Service Manual online
STR-DA5800ES
5
NOTE OF REPLACING THE IC1410 ON THE DCDC
BOARD
IC1410 on the DCDC board cannot exchange with single. When
this part is damaged, exchange the complete mounted board.
BOARD
IC1410 on the DCDC board cannot exchange with single. When
this part is damaged, exchange the complete mounted board.
NOTE OF REPLACING THE IC3903 AND IC3904 ON
THE DCDC2 BOARD
IC3903 and IC3904 on the DCDC2 board cannot exchange with
single. When these parts are damaged, exchange the complete
mounted board.
THE DCDC2 BOARD
IC3903 and IC3904 on the DCDC2 board cannot exchange with
single. When these parts are damaged, exchange the complete
mounted board.
NOTE OF REPLACING THE IC3500 AND IC3700 ON
THE D-VIDEO BOARD
IC3500 and IC3700 on the D-VIDEO board cannot exchange with
single. When these parts are damaged, exchange the complete
mounted board.
THE D-VIDEO BOARD
IC3500 and IC3700 on the D-VIDEO board cannot exchange with
single. When these parts are damaged, exchange the complete
mounted board.
NOTE OF REPLACING THE IC3505 AND IC3506 ON
THE D-VIDEO BOARD
Replacement of IC3505 and IC3506 on the D-VIDEO board used
in this unit requires a special tool.
THE D-VIDEO BOARD
Replacement of IC3505 and IC3506 on the D-VIDEO board used
in this unit requires a special tool.
NOTE OF REPLACING THE IC101, IC501 AND IC2601
ON THE NETWORK BOARD
IC101, IC501 and IC2601 on the NETWORK board cannot ex-
change with single. When these parts are damaged, exchange the
complete mounted board.
ON THE NETWORK BOARD
IC101, IC501 and IC2601 on the NETWORK board cannot ex-
change with single. When these parts are damaged, exchange the
complete mounted board.
NOTE OF REPLACING THE IC106, IC107, IC206 AND
IC207 ON THE NETWORK BOARD
Replacement of IC106, IC107, IC206 and IC207 on the NET-
WORK board used in this unit requires a special tool.
IC207 ON THE NETWORK BOARD
Replacement of IC106, IC107, IC206 and IC207 on the NET-
WORK board used in this unit requires a special tool.
NOTE OF REPLACING THE IC101 AND IC102 ON
THE USB-DDC BOARD (AEP, UK and Taiwan models
only)
IC101 and IC102 on the USB-DDC board cannot exchange with
single. When these parts are damaged, exchange the complete
mounted board.
THE USB-DDC BOARD (AEP, UK and Taiwan models
only)
IC101 and IC102 on the USB-DDC board cannot exchange with
single. When these parts are damaged, exchange the complete
mounted board.
NOTE OF REPLACING THE IC100 ON THE USB-DDC
BOARD (AEP, UK and Taiwan models only)
Replacement of IC100 on the USB-DDC board used in this unit
requires a special tool.
BOARD (AEP, UK and Taiwan models only)
Replacement of IC100 on the USB-DDC board used in this unit
requires a special tool.
MODEL IDENTIFICATION
Distinguish the model by part number on back panel.
Distinguish the model by part number on back panel.
– Back Panel –
US and Canadian models:
4-422-950-0s
4-422-950-0s
AEP and UK models:
4-422-950-1s
Taiwan model:
4-422-950-3s
4-422-950-1s
Taiwan model:
4-422-950-3s
CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, for the electric shock prevention, con-
nect the resistors to both ends of respective capacitors (C905 on
the ACDC board) to discharge the capacitors (C905 on the ACDC
board).
When checking the board, for the electric shock prevention, con-
nect the resistors to both ends of respective capacitors (C905 on
the ACDC board) to discharge the capacitors (C905 on the ACDC
board).
– ACDC Board (Conductor Side) –
C905
800
:/2 W
ADVANCE PREPARATION OF REPAIR
(US and Canadian models only)
This unit in US and Canadian models can perform “PRO-UP-
GRADE” by C4 (Control4) dealer.
When the user is performing “PRO-UPGRADE”, GUI of C4
(Control4) world is displayed.
Display GUI in the following procedure and confi rm the state of
displayed GUI.
(US and Canadian models only)
This unit in US and Canadian models can perform “PRO-UP-
GRADE” by C4 (Control4) dealer.
When the user is performing “PRO-UPGRADE”, GUI of C4
(Control4) world is displayed.
Display GUI in the following procedure and confi rm the state of
displayed GUI.
Connection:
STR-
DA5800ES
monitor
D-VIDEO board
HDMI OUT A ARC connector
(CN3502)
HDMI OUT A ARC connector
(CN3502)
HDMI cable
Procedure:
1. Press the [
1. Press the [
?/1
] button to turn on the main power.
2. Press the [HDMI OUT A/B/OFF] button to select “HDMI A”.
3. Press the [HOME] button of remote commander.
4. “PRO-UPGRADE” is not performed when the following
3. Press the [HOME] button of remote commander.
4. “PRO-UPGRADE” is not performed when the following
screen is displayed.
Note: If the following processing is performed to this unit by which
“PRO-UPGRADE” was performed, this unit returns to the state
before “PRO-UPGRADE” is performed.
before “PRO-UPGRADE” is performed.
•
Complete NETWORK board replacing
•
Factory
reset
Since the change to C4 (Control4) world can perform only by
C4 (Control4) dealer, fully work carefully.
C4 (Control4) dealer, fully work carefully.
Ver. 1.2
Click on the first or last page to see other STR-DA5800ES service manuals if exist.