Read Sony STR-DA5800ES Service Manual online
STR-DA5800ES
22
2-11. D-VIDEO BOARD BLOCK-1
1
connector
(CN3571)
6
connector
(CN3509)
(See Fig. C)
8
connector (CN3607)
(See Fig. C)
0
connector (CN3523)
(See Fig. D)
3
connector
(CN3511)
2
wire (flat type) (13 core)
(CN3510)
5
Remove wires
from lead pin.
(See Fig. C)
lead pin
SB-SPTM board
D-VIDEO board
D-VIDEO board
7
Remove the wire from clamp (L35).
(See Fig. C)
clamp (L35)
clamp (L35)
lead pin
SB-SPTM board
heat sink
Note 3: The wire must not touch heat sinks.
Note 3: The wire must not touch heat sinks.
Note 3: The wire must not touch heat sinks.
Rear side
Rear side
< Fig. C >
< Fig. D >
D-VIDEO board
heat sink
heat sink
Wire setting
colored line
colored line
Insert is straight to the interior.
Insert is incline
wire (flat type)
wire (flat type)
connector
connector
OK
NG
Note 2: When installing the wire (flat type), ensure the colored line.
No slanting after insertion.
Note 1: In reassembling, use new cable tie
to fasten the clamp same as before.
(AEP, UK, TW)
9
Cut the cable tie.
(See Fig. D)
4
Cut the cable tie.
(See Fig. C)
cable tie
cable tie
(US, CND)
(AEP, UK, TW)
• Abbreviation
CND : Canadian model
TW :
CND : Canadian model
TW :
Taiwan
model
Ver. 1.2
Click on the first or last page to see other STR-DA5800ES service manuals if exist.