Read Sony STR-DA5500ES (serv.man2) Service Manual online
SERVICE MANUAL
SUPPLEMENT-1
STR-DA5500ES
Ver. 1.2 2009.11
9-889-591-81
Subject: CONFIRMATION OF NETWORK OPERATION
NOTE OF REPLACING THE NETWORK BOARD
CONFIRMATION OF NETWORK OPERATION
Note: When this confi rmation is executed, IP address is changed.
Necessary machinery and materials:
•
•
PC (Windows XP/Vista)
• Router
(Transmission rate is 100 Mbps or more, built-in DHCP server
function)
function)
•
Two LAN cables
(Category 5 cable, normal type or shield type)
• Monitor
•
•
Multifunction remote commander
(RM-AAL021 or RM-AAL022)
Connection:
(The router need not be connected with the internet)
(The router need not be connected with the internet)
LAN cable
router
PC
set
monitor
NETWORK board
LAN jack (CN8005)
LAN jack (CN8005)
A-VIDEO board
MONITOR VIDEO OUT
jack (J6002) or
D-VIDEO board
HDMI OUT A connector
(CN3511)
MONITOR VIDEO OUT
jack (J6002) or
D-VIDEO board
HDMI OUT A connector
(CN3511)
VIDEO cable or
HDMI cable
HDMI cable
Procedure:
1. The setting of LAN of PC is setting to the automatic IP address
1. The setting of LAN of PC is setting to the automatic IP address
assignment.
It changes to the setting that displays the image in the monitor.
2. The above-mentioned connection is done.
3. The power supply of the router is turn on, next, the power sup-
3. The power supply of the router is turn on, next, the power sup-
ply of PC and the set is turn on.
4. Press the [GUI MODE] button of the remote commander, the
GUI screen is displayed in the monitor.
5. The “Settings” is selected on the GUI screen.
Next, “Network Setup” in “Network” is selected, and press the
[ENTER] button of remote commander.
[ENTER] button of remote commander.
6. When the network setting is a unsetting, “Next” is selected on
the screen of “Start Network function initial Setup Wizard”,
and press the [ENTER] button of remote commander.
and press the [ENTER] button of remote commander.
When it has already been set, “Internet Setup” is selected on
the screen of “Select Setup item”, and press the [ENTER] but-
ton of remote commander.
the screen of “Select Setup item”, and press the [ENTER] but-
ton of remote commander.
7. “Connect Automatically (DHCP)” is selected on the screen of
“Confi gures network settings automatically or manually”, and
press the [ENTER] button of remote commander.
press the [ENTER] button of remote commander.
8. The automatically connect function operates, it becomes the
screen of “Success!” tens of seconds later, the confi rmation
ends when “Finish” is selected.
ends when “Finish” is selected.
NOTE OF REPLACING THE NETWORK BOARD
When the NETWORK board is exchanged, the MAC address has
been changed.
Please print and cut out the following explanations, and return it
with the set that completes the repair.
When the NETWORK board is exchanged, the MAC address has
been changed.
Please print and cut out the following explanations, and return it
with the set that completes the repair.
MAC address of this receiver has been changed by this repair.
The customer who uses the MAC address fi ltering function of
connected access point equipment please set it again. MAC ad-
dress is possible to confi rm it on the network setting screen of ES
utility of an attachment application.
The customer who uses the MAC address fi ltering function of
connected access point equipment please set it again. MAC ad-
dress is possible to confi rm it on the network setting screen of ES
utility of an attachment application.
File this supplement with the service manual.
US Model
Canadian Model
AEP Model
UK Model
STR-DA5500ES
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2009.07
New
1.1
2009.08
Addition of “Network update check” in special menu mode
Change of Part No. for D-VIDEO board (AEP and UK models)
Change of mounted parts on D-VIDEO board (AEP and UK models)
(SMR-09037)
1.2
2009.11
Deletion of Part No. for Ref. No. IC3601 on D-VIDEO board (not supplied)
Deletion of Part No. for Ref. No. IC8005 on NETWORK board (not supplied)
Change of Part No. for extension jig
Addition of CONFIRMATION OF NETWORK OPERATION (SUPPLEMENT-1)
Addition of NOTE OF REPLACING THE NETWORK BOARD (SUPPLEMENT-1)
(SMR-09071)
Display
