STR-DA5300ES - Sony Audio Service Manual (repair manual). Page 13

13

You can use the supplied remote RM-AAL008 to operate 
the receiver and to control the Sony audio/video 
components that the remote is assigned to operate.

A

?

1

Press to turn on or off the audio/video 
components that the remote is assigned to 
operate. If you press the ?/1 (B) at the 
same time, it will turn off the receiver 
and other Sony components (SYSTEM 
STANDBY).

The function of the AV?/1 switch 
changes automatically each time you press 
the input button (C).

B ?

1

Press to turn the receiver on or off.
If ZONE 2 or ZONE 3 is selected, only 
the main receiver is turned on or off with 
this button. To turn off all components 
including an amplifier in zone 2 or zone 3, 
press ?/1 and AV?/1 (A) at the same 
time (SYSTEM STANDBY).

C

Press one of the buttons to select the 
component you want to use. Press a 
pink-labeled button after pressing SHIFT 
(wj). When you press any of the input 
buttons, the receiver turns on. 
The buttons are factory assigned to 
control Sony components. You can 
program the remote to control non-
Sony components following the steps in 
“Programming the remote”.

D

Press to enable the zone 2 or zone 3 
operation.

E

Press to enable the receiver operation.

F

Press to select sound field. 

G

Press to select sound field.

H

Press to

− preset/tune to preset stations.

− select track numbers of the CD player, 

DVD player, Blu-ray Disc Player or 
MD deck. Press 0/10 to select track 
number 10.

− select channel numbers of the VCR or 

satellite tuner.

− After pressing TV (wk), press the 

numeric buttons to select the TV 
channels.

I

Press to enter the value after selecting a 
channel, disc or track using the numeric 
buttons.

Press to store a station during tuner 
operation.

J

Press to display the menu to operate the 
receiver.

K

V/v/B/b

Press V/v/B/b to select the menu items. 
Then press 

L

Press to display and select items from 
option menus for receiver and DVD 
player, Blu-ray Disc Player.

Press to display and select items from the 
option menus for DVD player or Blu-ray 
Disc Player, etc.

M

Press to display the menu to operate the 
audio/video components.

Press SHIFT (wj), then press MENU to 
switch the display mode of the menu 
between SCREEN (to display the menu on 
the TV screen) and DSPL (to display the 
menu in the display window).

N

Press to select the category for satellite 
tuner.

O m

M

x

X

H

.

>

Press to operate the DVD player, Blu-ray 
Disc Player, CD player, MD deck, tape 
deck, or component connected to the 
DIGITAL MEDIA PORT adapter etc.

Press to select the category mode for 
satellite tuner. 

Press to select station. 

P

Press to register FM/AM/satellite tuner 
stations or to select preset stations.

Press TV (wk), then press TV CH+/

− to 

operate the TV, satellite tuner, VCR, etc.

to enter the selection.

Q

Press TV (wk), then press F1 or F2 to 
select a component to operate.
• HDD recorder

F1: HDD
F2: DVD player, Blu-ray Disc Player

• DVD/VHS combo player

F1: DVD player, Blu-ray Disc Player
F2: VHS

Press AMP (5), then press MACRO 1 or 
MACRO 2 to set up the macro function. 

Press TV/INPUT and TV (wk) at the 
same time to select the input signal 
(TV input or video input).

Press repeatedly to select the wide picture 
mode.

Press SHIFT (wj), then press PIP to 
switch the image of the PIP (Picture in 
Picture) window. The image will be 
changed as follows. EXT VIDEO t 
ZONE 2 VIDEO t OFF. You can swap 
the position of the main screen and the 
PIP window (swap) by pressing the 
(qa). You can also move the window 
position using V/v/B/b (qa).

The HDMI video signals are not output 
while the PIP window is displayed. 

Press SHIFT (wj), then press 
RESOLUTION repeatedly to change the 
resolution of signals output from the 
HDMI OUT or COMPONENT VIDEO 
MONITOR OUT jack.

R

Press to display the menus of the DVD 
player on the TV screen. Then use 
V/v/B/b and 

 to perform a menu 

operations.

Press AMP (5), then press NIGHT 
MODE to activate the NIGHT MODE 
function. 

Press AMP (5), then press INPUT 
MODE to select the input mode when the 
same components are connected to both 
digital and analog jacks. 

Press SHIFT (wj), then press SLEEP to 
activate the sleep timer function and the 
duration which the receiver turns off 
automatically.

Press SHIFT (wj), then press TEST 
TONE to output the test tone from each 
speaker.

S

Press to turn off the sound temporarily. 
Press the button again to restore the sound.

T

Press to adjust the volume level of all 
speakers at the same time.

Press TV (wk), then press TV VOL +/

− 

to adjust the volume level of the TV.

U

Press to skip a disc when using a 
multi-disc changer.

V

O

Press to return to the previous menu or 
exit the menu while the menu or on-screen 
guide of the VCR, DVD player, or 
satellite tuner is displayed on the TV 
screen.

W

Press to select information displayed in 
the display window, TV screen of the 
VCR, satellite tuner, CD player, DVD 
player, Blu-ray Disc Player, or MD deck.

In the SCREEN mode, press the button to 
display the menu on the TV screen.

a)

See the table for information on the buttons that you can use 
to control each component.

b)

The tactile dot is attached to these buttons (H, PRESET+). 
Use as a mark of operation.

•Some functions explained in this section may not work 

depending on the model.

•The above explanation is intended to serve as an example 

only. Therefore, depending on the component, the above 
operation may not be possible or may operate differently 
than described.

X

Press to

− clear a mistake when you press the 

incorrect numeric button.

− return to continuous playback, etc. of 

the satellite tuner or DVD player.

Press to select

− track numbers over 10 of the VCR, 

satellite tuner, CD player or MD deck.

− channel numbers of the Digital CATV 

terminal.

Press to enter direct tuning mode.

Y

Press to select sound field or to switch the 
audio of the selected input to analog 
signal without any adjustment.

Z

Press to select sound field.

wj

Press to light up the button. It changes the 
remote button function to activate the 
buttons with pink printing.

wk

Press to enable the TV operation.

wl

Press to set up the remote.