STR-DA3700ES - Sony Audio Service Manual (repair manual). Page 5

Note: When this confi rmation is executed, IP address is changed.

Necessary machinery and materials:
•  PC (Windows XP/Vista)
• Router
 

(Transmission rate is 100 Mbps or more, built-in DHCP server 
function)

•  Two LAN cables
 

(Category 5 cable, normal type or shield type)

• Monitor
•  Supplied multifunction remote commander (RM-AAL041)

Connection:
(The router need not be connected with the internet)

Procedure:
1.  The setting of LAN of PC is setting to the automatic IP address 

assignment. 

 

It changes to the setting that displays the image in the monitor.

2.  Perform connection with reference to connection fi gure.
3.  The power supply of the router is turn on, next, the power sup-

ply of PC and this unit is turn on.

4.  Press the [HOME] button of the remote commander, the home 

menu is displayed in the monitor.

5.  The “Settings” is selected on the home menu, and press the [ ] 

button of remote commander.

6.  The “Network Settings” is selected , and press the [ ] button 

of remote commander.

7.  The “Internet Settings” is selected , and press the [ ] button of 

remote commander.

8.  The “Network Setup” is selected , and press the [ ] button of 

remote commander.

9.  The “Auto” is selected , and press the [ ] button of remote 

commander.

10. The “Setup Cnfi rmation” is displayed , and press the [

,

] but-

ton of remote commander.

11.  The “Save & Connect” is selected , and press the [ ] button of 

remote commander.

12. The automatically connect function is performed.
13. Confi rm that the “Internet Access:   OK” has been displayed,  

and press the [ ] button of remote commander.

14. Press the [\/1] button to turn off the main power.

NOTE  OF  REPLACING  THE  NETWORK  BOARD
When the NETWORK board is exchanged, the MAC address has 
been changed.
Please print and cut out the following explanations, and return it 
with the unit that completes the repair.

MAC address of this receiver has been changed by this repair. 
The customer who uses the MAC address fi ltering function of 
connected access point equipment please set it again. MAC ad-
dress is possible to confi rm it on the System Information screen 
of this unit. Please refer to “Adjusting Settings” on the operating 
instructions for details.

CAPACITOR  ELECTRICAL  DISCHARGE  PROCESSING
When checking the board, for the electric shock prevention, con-
nect the resistors to both ends of respective capacitors (C905 on 
the ACDC board) to discharge the capacitors (C905 on the ACD-
Cboard).

:/2 W