Read Sony STR-DA3100ES Service Manual online
10
STR-DA3100ES
FLUORESCENT INDICATOR TUBE PATTERN
CHECK MODE
CHECK MODE
All fluorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the
[DISPLAY]
and
[MEMORY/ENTER]
but-
tons, press the
I/1
button to turn on the main power.
2. All segments and
[MULTI CHANNEL DECODING]
indicator
LED turn on.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set re-
ceives can be changed.
Procedure:
1. While pressing the
ceives can be changed.
Procedure:
1. While pressing the
[INPUT MODE]
button, press the
I/1
but-
ton to turn on the main power.
2. Either the message “COMMAND MODE [AV1]” or “COM-
MAND MODE [AV2]” appears. Select the desired mode.
SF LOCK ON/OFF CHANGE MODE
Procedure:
1. While pressing the
1. While pressing the
[MUSIC]
and
[MEMORY/ENTER]
buttons,
press the
I/1
button to turn on the main power.
2. Either the message “SF LOCK [OFF]” or “SF LOCK [ON]”
appears.
SECTION 4
TEST MODE
TUNER FACTORY PRESET MODE
All preset contents are reset to the default setting.
Procedure:
1. While pressing the
Procedure:
1. While pressing the
[SURR BACK DECODING]
and
[PRE-
SET TUNING --]
buttons, press the
I/1
button to turn on the
main power.
2. The message “TUNER FACTORY PRESET” appears and the
present contents are reset to the default values.
SOUND FIELD CLEAR MODE
The preset sound field is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
[MUSIC]
button, press the
I/1
button to
turn on the main power.
2. The message “S. F. Initialize” appears and initialization is per-
formed.
ALL CLEAR MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the
[INPUT MODE]
and
[MEMORY/ENTER]
buttons, press the
I/1
button to turn on the main power.
2. The message “MEMORY CLEARING...” appears and the
memories are reset to the default values.
3. When done, the message “MEMORY CLEARED!” appears.
SWAP MODE
Procedure:
1. While pressing the
1. While pressing the
[2CH]
and
[MEMORY/ENTER]
buttons,
press the
I/1
button to turn on the main power.
2. Press the
[DISPLAY]
button.
3. The message “–oodB” appears. (Volume level is “MIN”)
4. Press the
4. Press the
[DISPLAY]
button once again.
5. The message “–34.5dB” appears. (Volume level is “MID”)
6. Press the
6. Press the
[DISPLAY]
button once again.
7. The message “+23dB” appears. (Volume level is “MAX”)
Ver. 1.1
Click on the first or last page to see other STR-DA3100ES service manuals if exist.