Read Sony STR-DA2ES / STR-DB1080 Service Manual online
2
STR-DA2ES/DB1080
Inputs (Digital)
DVD/LD (Coaxial)
DVD/LD, TV/SAT,
MD/DAT, VIDEO3
(Optical)
MD/DAT, VIDEO3
(Optical)
Outputs
TAPE, MD/DAT
(REC OUT), VIDEO
1, 2 (AUDIO OUT)
(REC OUT), VIDEO
1, 2 (AUDIO OUT)
FRONT L/R,
CENTER,
SURROUND L/R,
SURROUND BACK,
SUB WOOFER
CENTER,
SURROUND L/R,
SURROUND BACK,
SUB WOOFER
EQ
BASS:
99 Hz~1.0 kHz
MID (FRONT L/R, CENTER only):
198 Hz~10 kHz
TREBLE:
1.0 kHz~10 kHz
Gain levels:
±10 dB, 0.5 dB step
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
S/N: 100 dB
(A, 20 kHz LPF)
S/N: 100 dB
(A, 20 kHz LPF)
(A, 20 kHz LPF)
Voltage: 150 mV
Impedance: 2.2 kilohms
Impedance: 2.2 kilohms
Voltage: 2 V
Impedance: 1 kilohms
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Sensitivity
Mono:
18.3 dBf, 2.2
µV/75 ohms
Stereo:
38.3 dBf, 22.5
µV/75 ohms
Usable sensitivity
11.2 dBf, 1
µV/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code U, CA
Models of area code U, CA
With 10-kHz tuning scale: 530 – 1,710 kHz
5)
With 9-kHz tuning scale: 531 – 1,710 kHz
5)
Models of area code E
With 10-kHz tuning scale: 530 – 1,610 kHz
5)
With 9-kHz tuning scale: 531 – 1,602 kHz
5)
Models of area code SP, CEL, CEK, KR
With 9-kHz tuning scale: 531 – 1,602 kHz
Antenna
Loop antenna
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m,
400 Hz)
400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz:
40 dB
5) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down TUNING + and press
?/1. All preset stations will be erased when you
change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
the receiver. Hold down TUNING + and press
?/1. All preset stations will be erased when you
change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO
(Except for models of area code CEL, CEK):
(Except for models of area code CEL, CEK):
Y: 1 Vp-p, 75 ohms
B-Y: 0.7 Vp-p, 75 ohms
R-Y: 0.7 Vp-p, 75 ohms
B-Y: 0.7 Vp-p, 75 ohms
R-Y: 0.7 Vp-p, 75 ohms
General
Power requirements
Area code
Power requirements
U, CA
120 V AC, 60 Hz
CEL, CEK
230 V AC, 50/60 Hz
SP
220 – 230 V AC, 50/60 Hz
E
120/220/240 V AC, 50/60 Hz
KR
220 – 230 V AC, 60 Hz
Power consumption
Area code
Power consumption
U
290 W
CA
340 VA
CEL, CEK
300 W
SP, E, KR
300 W
Power consumption (during standby mode)
0.8 W (when “POWER SAVE ” in the CUSTOMIZE
menu is set to “OFF”)/0.5 W (“ON”)
menu is set to “OFF”)/0.5 W (“ON”)
AC outlets
Area code
AC outlets
U, CA
2 switched, 120 W/1A MAX
SP, CEL, CEK
1 switched, 100 W MAX
E
2 switched, 100 W MAX
Dimensions
430
× 161 × 400 mm
including projecting parts
and controls
and controls
Mass (Approx.)
13.3 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Models of area code U, CA;
AM loop antenna (1)
Models of area code U, CA;
Audio/video/control S cord (1)
Control S cord (mini jack) (1)
Remote commander RM-PG411 (1)
R6 (size-AA) batteries (2)
Control S cord (mini jack) (1)
Remote commander RM-PG411 (1)
R6 (size-AA) batteries (2)
Models of other area codes;
Remote commander RM-LP211 (1)
R6 (size-AA) batteries (3)
R6 (size-AA) batteries (3)
Design and specifications are subject to change
without notice.
Click on the first or last page to see other STR-DA2ES / STR-DB1080 service manuals if exist.