Read Sony STR-DA1ES / STR-DB780 Service Manual online
2
STR-DA1ES/DB780
Outputs
MD/TAPE (REC
OUT), VIDEO 1, 2
(AUDIO OUT)
OUT), VIDEO 1, 2
(AUDIO OUT)
FRONT L/R,
CENTER,
SURROUND L/R,
SUB WOOFER
(Models of area code
U, CA only)
CENTER,
SURROUND L/R,
SUB WOOFER
(Models of area code
U, CA only)
SUB WOOFER
(Models of other area
codes)
(Models of other area
codes)
EQ
BASS:
99 Hz~1.0 kHz
(21 steps)
(21 steps)
TREBLE:
1.0 kHz~10 kHz
(23 steps)
(23 steps)
Gain levels:
±10 dB, 0.5 dB step
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Sensitivity
Mono:
18.3 dBf, 2.2
µV/75 ohms
Stereo:
38.3 dBf, 22.5
µV/75 ohms
Usable sensitivity
11.2 dBf, 1
µV/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code U, CA
Models of area code U, CA
With 10-kHz tuning scale: 530 – 1,710 kHz
6)
With 9-kHz tuning scale: 531 – 1,710 kHz
6)
Models of area code CN, SP, CEL, CEK, TW,
KR
KR
With 9-kHz tuning scale: 531 – 1,602 kHz
Antenna
Loop antenna
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m,
400 Hz)
400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz:
40 dB
6) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down TUNING + and press
?/1
the receiver. Hold down TUNING + and press
?/1
. All preset stations will be erased when you
change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO
(Except for models of area code CEL, CEK):
(Except for models of area code CEL, CEK):
Y: 1 Vp-p, 75 ohms
B-Y: 0.7 Vp-p, 75 ohms
R-Y: 0.7 Vp-p, 75 ohms
B-Y: 0.7 Vp-p, 75 ohms
R-Y: 0.7 Vp-p, 75 ohms
Voltage: 150 mV
Impedance: 10 kilohms
Impedance: 10 kilohms
Voltage: 2 V
Impedance: 1 kilohms
Impedance: 1 kilohms
Voltage: 2 V
Impedance: 1 kilohms
Impedance: 1 kilohms
General
Power requirements
Area code
Power requirements
U, CA
120 V AC, 60 Hz
CEL, CEK
230 V AC, 50/60 Hz
CN, SP, KR
220 – 230 V AC, 50/60 Hz
TW
110 V AC, 60 Hz
Power consumption
Area code
Power consumption
U
280 W
CA
330 VA
CEL, CEK
290 W
CN, SP, KR
290 W
TW
290 W (MAX 500W)
Power consumption (during standby mode)
0.5 W
AC outlets
Area code
AC outlets
U, CA
1 switched, 120 W/1A MAX
SP, TW
1 switched, 100 W MAX
Dimensions
430
× 161 × 400 mm
including projecting parts
and controls
and controls
Mass (Approx.)
12.5 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Models of area code U, CA;
AM loop antenna (1)
Models of area code U, CA;
Remote commander RM-PP506L (1)
R6 (size-AA) batteries (2)
R6 (size-AA) batteries (2)
Models of other area codes;
Remote commander RM-U305C (1)
R6 (size-AA) batteries (2)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
without notice.
Click on the first or last page to see other STR-DA1ES / STR-DB780 service manuals if exist.