Read Sony STR-DA1000ES / STR-DB790 Service Manual online
2
STR-DA1000ES/DB790
4) INPUT SHORT.
5) Weighted network, input level.
Inputs (Digital)
Outputs
EQ
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Sensitivity
Mono:
Mono:
18.3 dBf, 2.2
µV/75 ohms
Stereo:
38.3 dBf, 22.5
µV/75 ohms
Useable sensitivity
11.2 dBf, 1
µV/75 ohms
S/N
Mono: 76
Mono: 76
dB
Stereo: 70
dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation
Mono: 0.3%
Stereo: 0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
STR-DA1000ES:
STR-DA1000ES:
530 – 1,710 kHz
6)
(With 10-kHz tuning scale)
531 – 1,710 kHz
531 – 1,710 kHz
6)
(With 9-kHz tuning scale)
STR-DB790:
531 – 1,602 kHz
(With 9-kHz tuning scale)
(With 9-kHz tuning scale)
Antenna
Loop antenna
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
At 9 kHz:
35 dB
At 10 kHz:
40 dB
6) You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
B-Y: 0.7 Vp-p, 75 ohms
R-Y: 0.7 Vp-p, 75 ohms
B-Y: 0.7 Vp-p, 75 ohms
R-Y: 0.7 Vp-p, 75 ohms
DVD (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
DVD, TV/SAT, MD,
VIDEO3 (Optical)
VIDEO3 (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
MD/TAPE (REC OUT),
VIDEO 1, 2 (AUDIO
OUT)
VIDEO 1, 2 (AUDIO
OUT)
Voltage: 150 mV
Impedance: 2.2 kilohms
SUB WOOFER
Voltage: 2 V
Impedance: 1 kilohms
Gain levels
±10 dB, 1 dB step
General
Power requirements
Power consumption
Power consumption (during standby mode)
1 W
AC outlets
Dimensions
430 161 400 mm
including projecting parts
and controls
including projecting parts
and controls
Mass (Approx.)
14.5 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
STR-DA1000ES:
Remote commander RM-LG112 (1)
R6 (size-AA) batteries (2)
STR-DB790:
Remote commander RM-PP412 (1)
R6 (size-AA) batteries (2)
AM loop antenna (1)
STR-DA1000ES:
Remote commander RM-LG112 (1)
R6 (size-AA) batteries (2)
STR-DB790:
Remote commander RM-PP412 (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
without notice.
Area code
Power requirements
U, CA
120 V AC, 60 Hz
CEL, CEK, AU
230 V AC, 50/60 Hz
SP, MY, KR, CN
220 – 230 V AC, 50/60 Hz
TW
110 V AC, 60 Hz
Area code
Power consumption
U
290 W
CA
340 VA
CEL, CEK, AU
290 W
SP, MY, KR, CN
290 W
TW
290 W
Area code
AC outlets
U, CA
1 switched, 120 W/1A MAX
SP, MY, TW
1 switched, 100 W MAX
Ver 1.1
NOTE:
Abbreviation
AU
AU
: Australian model
CA
: Canadian model
CEK : UK model
CEL : AEP model
CN
CEL : AEP model
CN
: Chinese model
KR
: Korean model
MY : Malaysia model
SP
SP
: Singapore model
TW : Taiwan model
U
U
: US model
Click on the first or last page to see other STR-DA1000ES / STR-DB790 service manuals if exist.