Read Sony SS-WSB126 / SS-WSB127 / SS-WSB128 Service Manual online
SERVICE MANUAL
Published by Sony EMCS (Malaysia) PG Tec
Sony Corporation
SPECIFICATIONS
SPEAKER SYSTEM
9-890-640-04
2014I80-1
©
2014.09
Ver. 1.3 2014.09
• SS-WSB126 is Subwoofer in BDV-N7200W/N9200W/NF7220.
• SS-WSB127 is Subwoofer in BDV-N7200WL/N9200WL.
• SS-WSB128 is Subwoofer in BDV-N5200W.
• SS-WSB127 is Subwoofer in BDV-N7200WL/N9200WL.
• SS-WSB128 is Subwoofer in BDV-N5200W.
– Refer to next page for Parts list –
Photo: SS-WSB127
Photo: SS-WSB128
Photo: SS-WSB126
US Model
SS-WSB126/WSB128
Canadian Model
SS-WSB126
AEP Model
UK Model
Singapore Model
SS-WSB126/WSB127/WSB128
Russian Model
E Model
Australian Model
Chinese Model
SS-WSB126/WSB127
Mexican Model
PX Model
SS-WSB128
SS-WSB126/WSB127/
WSB128
Subwoofer (SS-WSB126) for
BDV-N9200W/BDV-N7200W
Dimensions (w/h/d) (approx.)
BDV-N9200W/BDV-N7200W
Dimensions (w/h/d) (approx.)
265 mm × 430 mm × 265 mm
(10
1
⁄
2
in × 17 in × 10
1
⁄
2
in)
Mass (approx.)
6.3 kg (13 lb 15 oz)
Subwoofer (SS-WSB127) for
BDV-N9200WL/BDV-N7200WL
Dimensions (w/h/d) (approx.)
BDV-N9200WL/BDV-N7200WL
Dimensions (w/h/d) (approx.)
SS-WSB127:
265 mm × 425 mm × 265 mm
Mass (approx.)
SS-WSB127:
6.2 kg
Subwoofer (SS-WSB128) for BDV-N5200W
Dimensions (w/h/d) (approx.)
Dimensions (w/h/d) (approx.)
225 mm × 365 mm × 345 mm
(8
7
⁄
8
in × 14
3
⁄
8
in × 13
5
⁄
8
in)
Mass (approx.)
5.8 kg (12 lb 13 oz) (with speaker cord)
Design and specifi cations are subject to change without notice.
SS-WSB126/WSB127/WSB128
2
• JIG
When disassembling the set, use the following jig (for speaker
When disassembling the set, use the following jig (for speaker
removal).
Part No. J-2501-238-A JIG FOR SPEAKER REMOVER
PARTS LIST (Subwoofer: SS-WSB126/WSB127/WSB128)
SS-WSB126 for BDV-N7200W/N9200W/NF7220
1
A-1976-264-A SS-WSB126 (BLACK) (CND)
1
A-1976-780-A SS-WSB126 (BLACK) (N9200W: AEP)
1
A-1976-781-A SS-WSB126 (BLACK) (RU)
1
A-1976-782-A SS-WSB126
(BLACK)
(E12, E3, EA, AUS, SP, TH, TW)
1
A-1976-783-A SS-WSB126 (BLACK) (CH)
1
A-1976-784-A SS-WSB126 (BLACK) (MX6, E51, AR)
1
A-1977-787-A SS-WSB126 (BLACK) (US)
1
A-1979-062-A SS-WSB126 (BLACK) (E12)
1
A-1979-063-A SS-WSB126 (BLACK) (N7200W: AEP, UK)
1
A-1979-065-A SS-WSB126 (BLACK) (E32, E51, AR)
1
A-1979-271-A SS-WSB126 (BLACK) (NF7220: AEP)
2
2-682-469-11 FOOT (SW) (1 piece)
SS-WSB127 for BDV-N7200WL/N9200WL
1
A-1976-905-A SS-WSB127 (WHITE) (AEP)
1
A-1976-907-A SS-WSB127 (WHITE) (RU)
1
A-1976-908-A SS-WSB127 (WHITE) (E3, EA, AUS, SP, TH, TW)
1
A-1976-909-A SS-WSB127 (WHITE) (CH)
1
A-1976-910-A SS-WSB127 (WHITE) (MX6, E51, AR)
1
A-1979-068-A SS-WSB127 (WHITE) (AEP, UK)
2
2-682-469-11 FOOT (SW) (1 piece)
SS-WSB128 for BDV-N5200W
51
A-1976-842-A SS-WSB128
(US)
51
A-1976-990-A SS-WSB128 (PX, SP)
51
A-1976-991-A SS-WSB128 (AEP, UK)
51
A-1976-993-A SS-WSB128
(MX)
52
2-682-469-11 FOOT (SW) (1 piece)
Ref. No.
Part No.
Description
Remark
2
2
1
51
52
52
Ver. 1.3
• Abbreviation
AR : Argentina
AR : Argentina
model
AUS : Australian
model
CH : Chinese
model
CND : Canadian
model
E3
: 240 V AC area in E model
E12
: 220 – 240 V AC area in E model
E32
: 110 – 240 V AC area in E model
E51
: Chilean and Peruvian models
EA
: Saudi
Arabia
model
MX : Mexican
model
MX6 : Latin-American
model
PX
: PX
model
RU : Russian
model
SP
: Singapore
model
TH
: Thai
model
TW : Taiwan
model
MEMO
SS-WSB126/WSB127/WSB128
3
SS-WSB126/WSB127/WSB128
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.01
New
1.1
2014.04
Addition of Chinese, Taiwan and Thai models (SS-WSB126/WSB127).
Addition of Singapore model (SS-WSB126/WSB127/WSB128).
1.2
2014.06
Addition of Russian, Chilean and Peruvian models (SS-WSB126/WSB127).
1.3
2014.09
Addition of Argentina model (SS-WSB126/WSB127).
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.