Read Sony SS-US301 / SW-US301 / UZ-US301 Service Manual online
8
SS-US301/SW-US301/UZ-US301
[TEST MODE]
Procedure:
1. While pressing the
1. While pressing the
[S-MODE]
button and the
I/1
button,
change over the
[AUTO POWER]
switch from OFF to ON.
2. All LED’s light up when the test mode is activated.
3. Press the
3. Press the
[S-MODE]
button to display the version. (The
corresponding
[VOLUME]
LED will blink. (indicated in binary
notation))
4. Press the
[VOLUME +]
button to increase the volume point, or
the
[VOLUME -]
button to decrease the volume point.
5. Press the
[WOOFER]
button and the woofer level becomes
settable, and then press the
[VOLUME +]
button to increase
the woofer level by 2 dB (up to +6 dB), or press the
[VOLUME
-]
button to reduce the woofer level by 2 dB (down to –6 dB).
(LED display will shift one step each time the button is pressed)
Also, if the button is not pressed for 3 seconds, the volume
indication comes back.
Also, if the button is not pressed for 3 seconds, the volume
indication comes back.
6. Other buttons execute their functions respectively. (For the
APC (auto power control), the mode transits to APC mode
unless the button is pressed for 5 seconds)
unless the button is pressed for 5 seconds)
7. Press the
I/1
button to turn it OFF, and the test mode is
deactivated.
8. All settings become default values when the test mode is
deactivated.
SECTION 4
TEST MODE
Click on the first or last page to see other SS-US301 / SW-US301 / UZ-US301 service manuals if exist.