Read Sony SS-SLK1I / SS-SLK2I / WHG-SLK1I Service Manual online
SERVICE MANUAL
Published by Sony Techno Create Corporation
Sony Corporation
SS-SLK1i/SLK2i
SPECIFICATIONS
SPEAKER SYSTEM
9-889-893-02
2011E05-1
©
2011.05
US Model
Canadian Model
AEP Model
Chinese Model
Saudi Arabia Model
Singapore Model
Korean Model
Thai Model
SS-SLK1i
Mexican Model
Brazilian Model
Argentina Model
SS-SLK2i
E Model
SS-SLK1i/SLK2i
Ver. 1.1 2011.05
• SS-SLK1i is the front speaker in WHG-SLK1i/SLK1iV.
• SS-SLK2i is the front speaker in WHG-SLK2i/SLK2iV.
• SS-SLK2i is the front speaker in WHG-SLK2i/SLK2iV.
PARTS LIST (SS-SLK1i)
A-1773-695-A OVERALL ASSY (1 piece)
Ref. No.
Part No.
Description
Remark
Photo: SS-SLK1i
Photo: SS-SLK2i
– Refer to next page for SS-SLK2i –
Front speaker (SS-SLK2i) for WHG-
SLK2i
Speaker system:
2-way 2-driver speaker system, Bass
reflex
reflex
Speaker unit
Woofer: 130 mm, cone type
Tweeter: 40 mm, cone type
Tweeter: 40 mm, cone type
Rated impedance: 6 Ω
Dimensions (W/H/D):
Dimensions (W/H/D):
Approx. 330 mm × 203 mm ×
138 mm
138 mm
Mass:
Approx. 3.1 kg
Front speaker (SS-SLK1i) for WHG-
SLK1i
Speaker system:
2-way 2-driver speaker system, Bass
reflex
reflex
Speaker unit
Woofer: 100 mm, cone type
Tweeter: 40 mm, cone type
Tweeter: 40 mm, cone type
Rated impedance: 8 Ω
Dimensions (W/H/D):
Dimensions (W/H/D):
Approx. 140 mm × 203 mm ×
138 mm
138 mm
Mass:
Approx. 1.3 kg
SS-SLK1i/SLK2i
2
SECTION 1
DISASSEMBLY
•
This set can be disassembled in the order shown below.
1-1. DISASSEMBLY FLOW
SET (SS-SLK2i)
1-2. GRILLE
FRAME
ASSY
(Page
2)
1-3. LOUDSPEAKER (4 cm, 13 cm) (SP1, SP2)
(Page
(Page
3)
1 Remove eight bosses with a jig.
Note
2: Be careful not to damage the cabinet.
2 grille frame assy
total eight bosses
Cut off the grille net
along the frame.
along the frame.
total eight bosses
frame
cutter
etc.
Note 3: When being not able to remove the grille frame assy with a jig well,
cut off the grille net with a cutter etc. and remove the grille frame assy.
In that case, be sure to exchange it for new grille frame assy.
• JIG
When disassembling the set, use the following jig (for speaker
When disassembling the set, use the following jig (for speaker
removal).
Part No. J-2501-238-A JIG FOR SPEAKER REMOVAL
Note: Follow the disassembly procedure in the numerical order given.
1-2. GRILLE FRAME ASSY
Note 1: Please set as shown in fi gure and work.
SS-SLK1i/SLK2i
3
1 four screws (4 u 20)
A white
A white
E black
E black
D black
D black
C red
C red
B black/white
B black/white
1 two screws (3.5 u 14)
3 connection cord (TW)
4 loudspeaker (4 cm) (SP1) (tweeter)
loudspeaker (4 cm) (SP1) (tweeter)
4 loudspeaker (13 cm ) (SP2) (woofer)
loudspeaker (13 cm) (SP2) (woofer)
2 three speaker terminals
2 two speaker terminals
3RVLWLRQRIFRQQHFWLRQFRUG
connection cord
connection cord (TW)
1-3. LOUDSPEAKER (4 cm, 13 cm) (SP1, SP2)
Note: Please set as shown in fi gure and work.
SS-SLK1i/SLK2i
4
SECTION 2
EXPLODED VIEW
Note:
• -XX and -X mean standardized parts, so
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
vice. Some delay should be anticipated
when ordering these items.
• The mechanical parts with no reference
number in the exploded views are not sup-
plied.
plied.
• Color Indication of Appearance Parts Ex-
ample:
KNOB, BALANCE (WHITE) . . . (RED)
↑
↑
Parts Color Cabinet’s Color
1
2
3
4
6
SP2
SP1
7
5
1
A-1773-699-A FRAME
ASSY,
GRILLE
2
4-238-407-12 SCREW (1) (4X20), +BV TAPPING
3
4-874-614-02 SCREW (1) (3.5X14), TAPPING
4
A-1781-297-A CABINET
ASSY,
SPEAKER
5
1-838-252-11 CORD, CONNECTION (TW)
6
1-838-253-11 CORD,
CONNECTION
7
4-225-252-01 CUSHION
(FOOT)
SP1
1-858-440-11 LOUDSPEAKER (4 cm) (Tweeter)
SP2
1-858-438-11 LOUDSPEAKER (13 cm) (Woofer)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
SS-SLK2i
