SS-SHAKE100, SS-SHAKE99 - Sony Audio Service Manual (repair manual). Page 8

1.0

2014.01

New

1.1

2014.05

Addition of Argentina model (SS-SHAKE99).

Addition of SS-SHAKE100 model.

Add Cushion C in page 5.

1.2

2014.07

Add Ref. No. 23 in page 5.

Change P/N of Ref. No. 10, 12, 13, 14, 15, 18 and 20 in page 5.

1.3

2014.12

Add Note 2 in page 5.

1.4

2015.04

Change P/N and description of D3600 in SPK RGB LED board.

Change P/N and description of D3701 and D3702 in STROBE+RGB_1 board.

Change P/N and description of D3801 and D3802 in STROBE+RGB_2 board.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note:  If you still see the original page, press the [Enter] key again.