Read Sony SS-CTB125 / SS-CTB126 / SS-CTB127 / SS-TSB133 / SS-TSB134 / SS-TSB135 / SS-TSB136 / SS-TSB137 / SS-TSB138 / SS-TSB139 / SS-TSB140 / SS-TSB141 / SS-TSB142 Service Manual online
SS-CTB125/CTB126/CTB127/TSB133/TSB134/TSB135/TSB136/TSB137/TSB138/TSB139/TSB140/TSB141/TSB142
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.01
New
1.1
2014.04
Addition of Chinese, Taiwan and Thai models (SS-CTB125/CTB126/TSB133/TSB134/TSB138/TSB139).
Addition of Singapore model (SS-CTB125/CTB126/CTB127/TSB133/TSB134/TSB137/TSB138/
TSB139/TSB142).
1.2
2014.06
Addition of Chilean and Peruvian models (SS-CTB125/CTB126/TSB133/TSB134/TSB135/TSB138/
TSB139/TSB140).
Addition of Russian models (SS-CTB125/CTB126/TSB133/TSB134/TSB138/TSB139).
1.3
2014.09
Addition of Argentina model (SS-CTB125/CTB126/TSB133/TSB134/TSB135/TSB138/TSB139/TSB140).
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.