Read Sony SS-CT1200D / SS-GN1200D / SS-RSX1200D / SS-WGV1200D Service Manual online
SS-CT1200D/GN1200D/RSX1200D/WGV1200D
3
2
3
A
1
B
C
SUBWOOFER
LEVEL
SUBWOOFER
ON/OFF
HCD-GN1200D
SWPANEL BOARD
11
(11)
1-872-864-
E
0dB
-3dB
-6dB
-12dB
-3dB
-6dB
-12dB
1
4
Q1400
R1405
R1406
JR1400
D1400
C1400
CN1400
JR1402
C1401
R1401
R1402
R1403
R1404
R1404
S1400
SW1400
1-1. PRINTED WIRING BOARD (SS-WGV1200D)
SECTION 1
DIAGRAMS
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if the
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong
viscosity
Unleaded solder is more viscou-s (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
For Printed Wiring Boards.
Note:
•
•
X : Parts extracted from the component side.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
• Indication of transistor.
• Indication of transistor.
C
B
These are omitted.
E
Q
Click on the first or last page to see other SS-CT1200D / SS-GN1200D / SS-RSX1200D / SS-WGV1200D service manuals if exist.